[Wed Sep  5 16:32:29 2012] Detection parameters:
  Position = (254.7, 376.1) = 5 31 47.99 -65 50 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.0 +/- 19.4
  Background counts = 33.6
  Rate = 0.01 +/- 0.001

[Wed Sep  5 16:32:30 2012] Off-axis axis estimate = 6.46'
[Wed Sep  5 16:35:07 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 16:35:07 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Wed Sep  5 16:35:07 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Wed Sep  5 16:35:07 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.66"
[Wed Sep  5 18:34:57 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src15.ximg exists
[Wed Sep  5 18:34:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src15.csv
[Wed Sep  5 18:34:57 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Sep  5 18:34:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src15.csv
[Wed Sep  5 18:34:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 18:34:58 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Sep  5 18:34:58 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Sep  5 18:34:58 2012] Fit fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Sep  5 21:42:01 2012] Source 19 is offset by 8.087993 and -4.598754 pixels which is larger than
2 X fitted extent = 1.716363 x 1.716363, not incorporating fit results
[Wed Sep  5 21:42:01 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 21:42:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 21:42:01 2012] Assessing source extent using major
[Wed Sep  5 21:42:01 2012] Source does appear to be extended
[Wed Sep  5 21:42:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 21:42:31 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:42:31 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Wed Sep  5 21:42:31 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Wed Sep  5 21:42:31 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.66"
[Wed Sep  5 23:11:28 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Sep  5 23:11:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src15.csv
[Wed Sep  5 23:11:28 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Sep  5 23:11:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src15.csv
[Wed Sep  5 23:11:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 23:11:29 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Sep  5 23:11:29 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Sep  5 23:11:29 2012] Fit fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Sep  6 01:31:37 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.193250 pixels away
[Thu Sep  6 01:31:37 2012] Spatial fit model total counts = 680.565000, observed total counts = 680.000000
[Thu Sep  6 01:31:37 2012] Offset between fit and detection position for source 19 = 0.166791 pixels
[Thu Sep  6 01:31:37 2012] 668.117000 total counts/ 546.304000 bgd. counts: snr = 5.211664
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.166791 pixels
  Position = (254.6, 376.1) = 5 31 48.11 -65 50 20.1
  Extent = 5.1 (4.2-6.0)", rotation angle = 0
  Source counts = 121.8 +/- 25.8
  Background counts = 546.3
  Rate = 0.003 +/- 0.0007
[Thu Sep  6 01:31:37 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:31:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:31:37 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 01:31:37 2012] Source does appear to be extended
[Thu Sep  6 01:31:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 01:32:07 2012] XMMSAS src. selection expression = ellipse(22098.978400, 32670.382800, 306.906009, 306.906009, 0.000000, X, Y)
[Thu Sep  6 01:32:07 2012] Writing source region out to fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src19_src.reg
[Thu Sep  6 01:32:07 2012] Extracting stamp from image fullrun_pn_xmm0104060101_pi300-10000_cl_sm2.00.img.gz, (237, 358) - (272, 394)
[Thu Sep  6 01:32:07 2012] XMMSAS bgd. selection expression = annulus(22098.978400, 32670.382800, 511.510015, 1023.020029, X, Y) && !ellipse(21376.830600, 33059.114200, 387.137611, 387.137611, 0.000000, X, Y) && !ellipse(22659.959582, 31449.178600, 409.864012, 409.864012, 0.000000, X, Y)
[Thu Sep  6 01:32:07 2012] Writing fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src19.gif
[Thu Sep  6 01:47:45 2012] Mean detx,y = (67.23, 9159.00) 
[Thu Sep  6 01:47:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 01:48:00 2012] grppha failed
[Thu Sep  6 01:48:01 2012] Setting source spectrum file to fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src19_src.pi.gz
[Thu Sep  6 01:48:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Sep  6 02:39:51 2012] Updating aperture counts using extracted products
[Thu Sep  6 02:39:51 2012] Error reading totcts from fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src19_src.pi.gz
[Thu Sep  6 02:39:51 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 02:39:56 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Thu Sep  6 02:39:56 2012] Source 19 has no response, skipping
[Thu Sep  6 02:39:57 2012] xmm0104060101/analysis//spectral/fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete