[Wed Sep  5 16:33:23 2012] Detection parameters:
  Position = (358.5, 171.4) = 5 30 34.04 -66 5 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.0 +/- 8.7
  Background counts = 10.9
  Rate = 0.0009 +/- 0.0002

[Wed Sep  5 16:33:23 2012] Off-axis axis estimate = 10.19'
[Wed Sep  5 20:07:41 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 20:07:41 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Wed Sep  5 20:07:41 2012] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.235
[Wed Sep  5 20:07:41 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 11.52"
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src42.ximg exists
[Wed Sep  5 21:41:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src42.csv
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed Sep  5 21:41:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src42.csv
[Wed Sep  5 21:41:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed Sep  5 21:41:47 2012] Fit fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Wed Sep  5 21:42:16 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 12.084379 pixels away
[Wed Sep  5 21:42:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 21:42:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 21:42:16 2012] Assessing source extent using major
[Wed Sep  5 21:42:16 2012] Source does appear to be extended
[Wed Sep  5 21:42:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 00:38:42 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 00:38:42 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Thu Sep  6 00:38:42 2012] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.235
[Thu Sep  6 00:38:42 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 11.52"
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src42.ximg exists
[Thu Sep  6 01:31:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src42.csv
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src42_1.ximg exists
[Thu Sep  6 01:31:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src42.csv
[Thu Sep  6 01:31:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Thu Sep  6 01:31:23 2012] Fit fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Thu Sep  6 01:31:52 2012] Spatial fit model total counts = 197.994000, observed total counts = 196.000000
[Thu Sep  6 01:31:52 2012] Offset between fit and detection position for source 43 = 6.803355 pixels
[Thu Sep  6 01:31:52 2012] 168.465600 total counts/ 35.615600 bgd. counts: snr = 22.260834
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 6.803355 pixels
  Position = (362.7, 176.7) = 5 30 31.06 -66 4 47.0
  Extent = 23.0 (22.9-46.1)", rotation angle = 0
  Source counts = 132.8 +/- 13.0
  Background counts = 35.6
  Rate = 0.003 +/- 0.0003
[Thu Sep  6 01:31:52 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:31:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:31:52 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 01:31:52 2012] Source does appear to be extended
[Thu Sep  6 01:31:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 02:28:50 2012] XMMSAS src. selection expression = ellipse(31506.856000, 15327.600000, 1382.718040, 1382.718040, 0.000000, X, Y)
[Thu Sep  6 02:28:50 2012] Writing source region out to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src43_src.reg
[Thu Sep  6 02:28:50 2012] Extracting stamp from image fullrun_mos2_xmm0104060101_pi300-10000_cl_sm2.00.img.gz, (283, 97) - (442, 256)
[Thu Sep  6 02:28:50 2012] XMMSAS bgd. selection expression = annulus(31506.856000, 15327.600000, 2304.530066, 4609.060133, X, Y) && !ellipse(26410.752440, 12571.768000, 658.798419, 658.798419, 0.000000, X, Y) && !ellipse(30278.624400, 14376.567600, 433.700812, 433.700812, 0.000000, X, Y) && !ellipse(27729.392351, 12885.417441, 858.336025, 329.825154, 170.854364, X, Y) && !ellipse(34147.896140, 12667.323800, 369.039211, 369.039211, 0.000000, X, Y) && !ellipse(32086.403400, 12525.493600, 476.093614, 476.093614, 0.000000, X, Y) && !ellipse(27093.354736, 12063.280350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27896.673880, 15746.659000, 536.330415, 536.330415, 0.000000, X, Y) && !ellipse(34200.094019, 19794.785207, 440.033851, 250.598837, 322.394374, X, Y) && !ellipse(29205.011047, 13592.524124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27963.682764, 10776.246400, 486.373614, 119.178403, 356.881000, X, Y)
[Thu Sep  6 02:28:50 2012] Writing fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src43.gif
[Thu Sep  6 02:38:09 2012] Mean detx,y = (2475.55, 10329.77) 
[Thu Sep  6 02:38:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 02:38:51 2012] grppha failed
[Thu Sep  6 02:38:51 2012] Setting source spectrum file to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src43_src.pi.gz
[Thu Sep  6 02:38:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Thu Sep  6 02:39:52 2012] Updating aperture counts using extracted products
[Thu Sep  6 02:39:52 2012] Error reading totcts from fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src43_src.pi.gz
[Thu Sep  6 02:39:52 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 02:39:55 2012] Source 43 has no response, skipping
[Thu Sep  6 02:39:56 2012] xmm0104060101/analysis//spectral/fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete