[Wed Sep  5 16:33:23 2012] Detection parameters:
  Position = (427.3, 213.2) = 5 29 44.99 -66 2 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.4 +/- 8.5
  Background counts = 8.2
  Rate = 0.001 +/- 0.0002

[Wed Sep  5 16:33:23 2012] Off-axis axis estimate = 11.20'
[Wed Sep  5 20:07:41 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 20:07:41 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Wed Sep  5 20:07:41 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.149
[Wed Sep  5 20:07:41 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 12.03"
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src40.ximg exists
[Wed Sep  5 21:41:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src40.csv
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src40_1.ximg exists
[Wed Sep  5 21:41:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src40.csv
[Wed Sep  5 21:41:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Wed Sep  5 21:41:47 2012] Fit fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Wed Sep  5 21:42:16 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 11.290089 pixels away
[Wed Sep  5 21:42:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 21:42:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 21:42:16 2012] Assessing source extent using major
[Wed Sep  5 21:42:16 2012] Source does appear to be extended
[Wed Sep  5 21:42:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 00:38:42 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 00:38:42 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Thu Sep  6 00:38:42 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.149
[Thu Sep  6 00:38:42 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 12.03"
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src40.ximg exists
[Thu Sep  6 01:31:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src40.csv
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src40_1.ximg exists
[Thu Sep  6 01:31:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src40.csv
[Thu Sep  6 01:31:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Thu Sep  6 01:31:23 2012] Fit fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Thu Sep  6 01:31:52 2012] Spatial fit model total counts = 137.995000, observed total counts = 138.000000
[Thu Sep  6 01:31:52 2012] Offset between fit and detection position for source 37 = 0.066544 pixels
[Thu Sep  6 01:31:52 2012] 136.190600 total counts/ 115.506000 bgd. counts: snr = 1.924619
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.066544 pixels
  Position = (427.3, 213.2) = 5 29 45.04 -66 2 6.9
  Extent = 4.2 (3.0-7.9)", rotation angle = 0
  Source counts = 20.7 +/- 11.7
  Background counts = 115.5
  Rate = 0.0005 +/- 0.0003
[Thu Sep  6 01:31:52 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:31:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:31:52 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 01:31:52 2012] Source does appear to be extended
[Thu Sep  6 01:31:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 02:28:50 2012] XMMSAS src. selection expression = ellipse(37124.610260, 18503.467800, 252.326407, 252.326407, 0.000000, X, Y)
[Thu Sep  6 02:28:50 2012] Writing source region out to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src37_src.reg
[Thu Sep  6 02:28:50 2012] Extracting stamp from image fullrun_mos2_xmm0104060101_pi300-10000_cl_sm2.00.img.gz, (413, 199) - (442, 228)
[Thu Sep  6 02:28:50 2012] XMMSAS bgd. selection expression = annulus(37124.610260, 18503.467800, 420.544012, 841.088024, X, Y)
[Thu Sep  6 02:28:50 2012] Writing fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src37.gif
[Thu Sep  6 02:37:50 2012] Mean detx,y = (9060.45, 9266.68) 
[Thu Sep  6 02:37:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 02:37:55 2012] grppha failed
[Thu Sep  6 02:37:55 2012] Setting source spectrum file to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src37_src.pi.gz
[Thu Sep  6 02:37:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Thu Sep  6 02:38:59 2012] Not generating rmf since there are only 20 counts
[Thu Sep  6 02:38:59 2012] rmf not generated due to insufficient counts
[Thu Sep  6 02:39:52 2012] Updating aperture counts using extracted products
[Thu Sep  6 02:39:52 2012] Error reading totcts from fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src37_src.pi.gz
[Thu Sep  6 02:39:52 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 02:39:55 2012] Source 37 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep  6 02:39:56 2012] xmm0104060101/analysis//spectral/fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete