[Wed Sep  5 16:33:23 2012] Detection parameters:
  Position = (195.6, 276.0) = 5 32 30.25 -65 57 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.6 +/- 16.5
  Background counts = 10.7
  Rate = 0.006 +/- 0.0006

[Wed Sep  5 16:33:23 2012] Off-axis axis estimate = 7.63'
[Wed Sep  5 20:07:41 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 20:07:41 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Wed Sep  5 20:07:41 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.920
[Wed Sep  5 20:07:41 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.25"
[Wed Sep  5 21:41:46 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src8.ximg exists
[Wed Sep  5 21:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src8.csv
[Wed Sep  5 21:41:46 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Sep  5 21:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src8.csv
[Wed Sep  5 21:41:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Sep  5 21:41:47 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Sep  5 21:41:47 2012] Fit fullrun_mos2_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Sep  5 21:42:16 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.456877 pixels away
[Wed Sep  5 21:42:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 21:42:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 21:42:16 2012] Assessing source extent using major
[Wed Sep  5 21:42:16 2012] Source does appear to be extended
[Wed Sep  5 21:42:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 00:38:42 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 00:38:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 00:38:42 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Thu Sep  6 00:38:42 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.920
[Thu Sep  6 00:38:42 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.25"
[Thu Sep  6 01:31:22 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src8.ximg exists
[Thu Sep  6 01:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src8.csv
[Thu Sep  6 01:31:22 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Sep  6 01:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src8.csv
[Thu Sep  6 01:31:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Sep  6 01:31:23 2012] fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Sep  6 01:31:23 2012] Fit fullrun_mos2_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Sep  6 01:31:52 2012] Spatial fit model total counts = 269.027000, observed total counts = 269.000000
[Thu Sep  6 01:31:52 2012] Offset between fit and detection position for source 17 = 0.043610 pixels
[Thu Sep  6 01:31:52 2012] 269.329000 total counts/ 158.158000 bgd. counts: snr = 8.839871
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.043610 pixels
  Position = (195.6, 276.0) = 5 32 30.24 -65 57 34.4
  Extent = 4.1 (3.6-4.9)", rotation angle = 0
  Source counts = 111.2 +/- 16.4
  Background counts = 158.2
  Rate = 0.003 +/- 0.0004
[Thu Sep  6 01:31:52 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:31:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:31:52 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 01:31:52 2012] Source does appear to be extended
[Thu Sep  6 01:31:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 02:28:50 2012] XMMSAS src. selection expression = ellipse(16967.630000, 23965.246800, 248.782207, 248.782207, 0.000000, X, Y)
[Thu Sep  6 02:28:50 2012] Writing source region out to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src17_src.reg
[Thu Sep  6 02:28:50 2012] Extracting stamp from image fullrun_mos2_xmm0104060101_pi300-10000_cl_sm2.00.img.gz, (181, 262) - (210, 290)
[Thu Sep  6 02:28:50 2012] XMMSAS bgd. selection expression = annulus(16967.630000, 23965.246800, 414.637012, 829.274024, X, Y)
[Thu Sep  6 02:28:50 2012] Writing fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src17.gif
[Thu Sep  6 02:30:56 2012] Mean detx,y = (-7869.42, -2959.38) 
[Thu Sep  6 02:30:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 02:31:01 2012] grppha failed
[Thu Sep  6 02:31:01 2012] Setting source spectrum file to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src17_src.pi.gz
[Thu Sep  6 02:31:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Sep  6 02:39:52 2012] Updating aperture counts using extracted products
[Thu Sep  6 02:39:52 2012] Error reading totcts from fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src17_src.pi.gz
[Thu Sep  6 02:39:52 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 02:39:55 2012] Source 17 has no response, skipping
[Thu Sep  6 02:39:56 2012] xmm0104060101/analysis//spectral/fullrun_mos2_xmm0104060101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete