[Wed Sep  5 16:32:59 2012] Detection parameters:
  Position = (304.1, 145.0) = 5 31 12.99 -66 7 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3838.8 +/- 74.0
  Background counts = 11.1
  Rate = 0.2 +/- 0.004

[Wed Sep  5 16:32:59 2012] Off-axis axis estimate = 11.13'
[Wed Sep  5 18:34:59 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 18:34:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 18:34:59 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Wed Sep  5 18:34:59 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.848
[Wed Sep  5 18:34:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.00"
[Wed Sep  5 20:07:40 2012] fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep  5 20:07:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 20:07:40 2012] fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep  5 20:07:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 20:07:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 20:07:40 2012] fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep  5 20:07:40 2012] fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep  5 20:07:40 2012] Fit fullrun_mos1_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep  5 21:42:09 2012] Warning, spatial fit 1 centroid is now closest to src. 47
[Wed Sep  5 21:42:09 2012] Spatial fit model total counts = 2533.420000, observed total counts = 2952.000000
[Wed Sep  5 21:42:09 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 21:42:09 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 21:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 21:42:09 2012] Assessing source extent using major
[Wed Sep  5 21:42:09 2012] Source does appear to be extended
[Wed Sep  5 21:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 23:11:29 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 23:11:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 23:11:29 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Wed Sep  5 23:11:29 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.848
[Wed Sep  5 23:11:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.00"
[Thu Sep  6 00:38:40 2012] fullrun_mos1_xmm0104060101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep  6 00:38:40 2012] fullrun_mos1_xmm0104060101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep  6 00:38:40 2012] Fit fullrun_mos1_xmm0104060101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Sep  6 00:38:41 2012] fullrun_mos1_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep  6 00:38:41 2012] fullrun_mos1_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep  6 00:38:41 2012] Fit fullrun_mos1_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep  6 01:31:45 2012] Spatial fit model total counts = 3853.540000, observed total counts = 3870.000000
[Thu Sep  6 01:31:45 2012] Offset between fit and detection position for source 1 = 0.063432 pixels
[Thu Sep  6 01:31:45 2012] 3838.206000 total counts/ 898.496000 bgd. counts: snr = 98.072312
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.063432 pixels
  Position = (304.0, 145.0) = 5 31 13.03 -66 7 5.5
  Extent = 6.8 (6.6-6.9)", rotation angle = 0
  Source counts = 2939.7 +/- 62.0
  Background counts = 898.5
  Rate = 0.08 +/- 0.002
[Thu Sep  6 01:31:45 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:31:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:31:45 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 01:31:45 2012] Source does appear to be extended
[Thu Sep  6 01:31:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 02:17:44 2012] Counts = 2939.710000, rescaling region sizes by 2.000000
[Thu Sep  6 02:17:44 2012] XMMSAS src. selection expression = ellipse(26400.974242, 12565.596736, 813.014423, 813.014423, 0.000000, X, Y)
[Thu Sep  6 02:17:44 2012] Writing source region out to fullrun_mos1_xmm0104060101_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep  6 02:17:44 2012] Extracting stamp from image fullrun_mos1_xmm0104060101_pi300-10000_cl_sm2.00.img.gz, (257, 98) - (351, 192)
[Thu Sep  6 02:17:44 2012] XMMSAS bgd. selection expression = annulus(26400.974242, 12565.596736, 2710.048078, 5420.096156, X, Y) && !ellipse(30310.070920, 14406.249800, 432.352012, 432.352012, 0.000000, X, Y) && !ellipse(27707.200165, 12892.990280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29284.101715, 13634.632889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27078.860931, 12142.451996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27786.835114, 15771.076553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32106.012878, 12477.583069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23570.691071, 15640.494247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26443.783234, 13607.896744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24503.843340, 17949.097780, 413.066412, 413.066412, 0.000000, X, Y) && !ellipse(27985.985000, 10723.744360, 492.579214, 492.579214, 0.000000, X, Y) && !ellipse(31126.880554, 14865.147369, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 02:17:44 2012] Writing fullrun_mos1_xmm0104060101_pi300-10000_pass1_cl_src1.gif
[Thu Sep  6 02:17:48 2012] Mean detx,y = (11239.58, 2944.37) 
[Thu Sep  6 02:17:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 02:18:18 2012] grppha failed
[Thu Sep  6 02:18:18 2012] Setting source spectrum file to fullrun_mos1_xmm0104060101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 02:18:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0104060101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Sep  6 02:39:51 2012] Updating aperture counts using extracted products
[Thu Sep  6 02:39:51 2012] Error reading totcts from fullrun_mos1_xmm0104060101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 02:39:52 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 02:39:54 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Sep  6 02:39:54 2012] Source 1 has no response, skipping
[Thu Sep  6 02:39:55 2012] xmm0104060101/analysis//spectral/fullrun_mos1_xmm0104060101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete