[Fri Aug 17 10:08:23 2012] Detection parameters:
  Position = (320.1, 351.6) = 11 24 0.28 6 18 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.4 +/- 9.4
  Background counts = 17.4
  Rate = 0.008 +/- 0.002

[Fri Aug 17 10:08:23 2012] Off-axis axis estimate = 4.16'
[Fri Aug 17 10:10:21 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:10:21 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Fri Aug 17 10:10:21 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Fri Aug 17 10:10:21 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.51"
[Fri Aug 17 10:39:14 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Aug 17 10:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src5.csv
[Fri Aug 17 10:39:14 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Aug 17 10:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src5.csv
[Fri Aug 17 10:39:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 10:39:14 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug 17 10:39:14 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug 17 10:39:14 2012] Fit fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Aug 17 11:04:13 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.454496 pixels away
[Fri Aug 17 11:04:13 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:04:13 2012] Assessing source extent using major
[Fri Aug 17 11:04:13 2012] Source does appear to be extended
[Fri Aug 17 11:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 11:04:20 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 11:04:20 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Fri Aug 17 11:04:20 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Fri Aug 17 11:04:20 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.51"
[Fri Aug 17 11:26:33 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Aug 17 11:26:33 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Aug 17 11:26:33 2012] Fit fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri Aug 17 11:26:33 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 17 11:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Aug 17 11:26:33 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 17 11:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Aug 17 11:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:43:15 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 99.377614 pixels away
[Fri Aug 17 11:43:15 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 56.815240 pixels away
[Fri Aug 17 11:43:15 2012] Spatial fit model total counts = 164.130000, observed total counts = 160.000000
[Fri Aug 17 11:43:15 2012] Offset between fit and detection position for source 6 = 0.494033 pixels
[Fri Aug 17 11:43:15 2012] 162.858300 total counts/ 119.469000 bgd. counts: snr = 3.969676
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.494033 pixels
  Position = (320.5, 351.9) = 11 24 0.18 6 18 30.5
  Extent = 10.1" x 9.4", rotation angle = 359
  Source counts = 43.4 +/- 12.8
  Background counts = 119.5
  Rate = 0.007 +/- 0.002
[Fri Aug 17 11:43:15 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:43:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:43:15 2012] Assessing source extent using major
[Fri Aug 17 11:43:15 2012] Source does appear to be extended
[Fri Aug 17 11:43:15 2012] Computing asymmetry using major and minor axis, asym = 1.07
[Fri Aug 17 11:43:22 2012] XMMSAS src. selection expression = ellipse(27833.817455, 30566.753238, 603.072017, 563.262550, 359.155526, X, Y)
[Fri Aug 17 11:43:22 2012] Writing source region out to fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src6_src.reg
[Fri Aug 17 11:43:22 2012] Extracting stamp from image fullrun_pn_xmm0103863201_pi300-10000_cl_sm2.00.img.gz, (286, 317) - (355, 387)
[Fri Aug 17 11:43:22 2012] XMMSAS bgd. selection expression = annulus(27833.817455, 30566.753238, 1005.120029, 2010.240058, X, Y)
[Fri Aug 17 11:43:22 2012] Writing fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src6.gif
[Fri Aug 17 11:47:05 2012] Mean detx,y = (-4634.00, 4990.35) 
[Fri Aug 17 11:47:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 11:47:18 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 11:47:19 2012] Setting source spectrum file to fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 11:47:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Aug 17 12:00:02 2012] Not generating rmf since there are only 43 counts
[Fri Aug 17 12:00:02 2012] rmf not generated due to insufficient counts
[Fri Aug 17 12:54:21 2012] Updating aperture counts using extracted products
[Fri Aug 17 12:54:21 2012] Error reading totcts from fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 12:54:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 12:54:22 2012] Using photon index=1.80, rate=0.00684, arf fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src6.arf
[Fri Aug 17 12:54:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 12:54:22 2012] Updating source flux to 2.6e-14
[Fri Aug 17 12:54:48 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting