[Fri Aug 17 10:08:23 2012] Detection parameters:
  Position = (303.4, 273.8) = 11 24 5.17 6 12 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1123.8 +/- 39.6
  Background counts = 21.2
  Rate = 0.2 +/- 0.007

[Fri Aug 17 10:08:23 2012] Off-axis axis estimate = 1.82'
[Fri Aug 17 10:10:21 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:10:21 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Aug 17 10:10:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Fri Aug 17 10:10:21 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.34"
[Fri Aug 17 10:39:13 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 17 10:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src2.csv
[Fri Aug 17 10:39:13 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 17 10:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src2.csv
[Fri Aug 17 10:39:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 10:39:14 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 17 10:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Aug 17 10:39:14 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 17 10:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Aug 17 10:39:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:04:13 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Fri Aug 17 11:04:13 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:04:13 2012] Assessing source extent using major
[Fri Aug 17 11:04:13 2012] Source does appear to be extended
[Fri Aug 17 11:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 11:04:20 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 11:04:20 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Aug 17 11:04:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Fri Aug 17 11:04:20 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.34"
[Fri Aug 17 11:26:33 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 17 11:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src2.csv
[Fri Aug 17 11:26:33 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 17 11:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src2.csv
[Fri Aug 17 11:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:26:33 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 17 11:26:33 2012] fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 17 11:26:33 2012] Fit fullrun_pn_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug 17 11:43:15 2012] Spatial fit model total counts = 1598.600000, observed total counts = 1492.000000
[Fri Aug 17 11:43:15 2012] Offset between fit and detection position for source 2 = 0.267633 pixels
[Fri Aug 17 11:43:15 2012] 1457.772000 total counts/ 774.661000 bgd. counts: snr = 24.543440
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.267633 pixels
  Position = (303.4, 273.5) = 11 24 5.17 6 12 49.5
  Extent = 5.1 (4.8-5.4)", rotation angle = 0
  Source counts = 683.1 +/- 38.2
  Background counts = 774.7
  Rate = 0.1 +/- 0.006
[Fri Aug 17 11:43:15 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:43:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:43:15 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 11:43:15 2012] Source does appear to be extended
[Fri Aug 17 11:43:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 11:43:22 2012] XMMSAS src. selection expression = ellipse(26343.586000, 23748.211400, 306.377409, 306.377409, 0.000000, X, Y)
[Fri Aug 17 11:43:22 2012] Writing source region out to fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 17 11:43:22 2012] Extracting stamp from image fullrun_pn_xmm0103863201_pi300-10000_cl_sm2.00.img.gz, (286, 256) - (321, 291)
[Fri Aug 17 11:43:22 2012] XMMSAS bgd. selection expression = annulus(26343.586000, 23748.211400, 510.629015, 1021.258029, X, Y) && !ellipse(25282.287460, 23836.520200, 468.970413, 468.970413, 0.000000, X, Y) && !ellipse(26981.436000, 24799.029000, 804.096023, 804.096023, -0.000000, X, Y)
[Fri Aug 17 11:43:22 2012] Writing fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src2.gif
[Fri Aug 17 11:44:43 2012] Mean detx,y = (-598.31, -686.12) 
[Fri Aug 17 11:44:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 11:45:02 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 11:45:03 2012] Setting source spectrum file to fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 11:45:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 17 12:54:21 2012] Updating aperture counts using extracted products
[Fri Aug 17 12:54:21 2012] Error reading totcts from fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 12:54:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 12:54:22 2012] Using photon index=1.80, rate=0.108, arf fullrun_pn_xmm0103863201_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 12:54:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 12:54:22 2012] Updating source flux to 3.5e-13