[Fri Aug 17 10:09:13 2012] Detection parameters:
  Position = (447.6, 301.6) = 11 23 23.08 6 14 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.3 +/- 6.4
  Background counts = 3.7
  Rate = 0.003 +/- 0.0007

[Fri Aug 17 10:09:14 2012] Off-axis axis estimate = 10.82'
[Fri Aug 17 10:52:44 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:52:44 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Fri Aug 17 10:52:44 2012] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.180
[Fri Aug 17 10:52:44 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.84"
[Fri Aug 17 11:04:10 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Aug 17 11:04:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src7.csv
[Fri Aug 17 11:04:10 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Aug 17 11:04:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src7.csv
[Fri Aug 17 11:04:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:04:10 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Aug 17 11:04:10 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Aug 17 11:04:10 2012] Fit fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Aug 17 11:04:16 2012] Spatial fit model total counts = 51.738800, observed total counts = 53.000000
[Fri Aug 17 11:04:16 2012] Offset between fit and detection position for source 5 = 0.276055 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.276055 pixels
  Position = (447.8, 301.9) = 11 23 23.04 6 14 52.7
  Extent = 12.6 (10.3-13.7)", rotation angle = 0
  Source counts = 48.0 +/- 6.9
  Background counts = 0.0
  Rate = 0.006 +/- 0.0008
 Deleting source due to low signal-to-noise ratio