[Fri Aug 17 10:09:13 2012] Detection parameters:
  Position = (291.2, 274.9) = 11 24 8.71 6 12 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3527.3 +/- 69.4
  Background counts = 7.7
  Rate = 0.4 +/- 0.009

[Fri Aug 17 10:09:14 2012] Off-axis axis estimate = 1.79'
[Fri Aug 17 10:52:44 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:52:44 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Fri Aug 17 10:52:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.787
[Fri Aug 17 10:52:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Fri Aug 17 11:04:10 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 17 11:04:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 11:04:10 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 17 11:04:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 11:04:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:04:10 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 17 11:04:10 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 17 11:04:10 2012] Fit fullrun_mos2_xmm0103863201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 17 11:04:16 2012] Spatial fit model total counts = 3192.240000, observed total counts = 3150.000000
[Fri Aug 17 11:04:16 2012] Offset between fit and detection position for source 1 = 0.168834 pixels
[Fri Aug 17 11:04:16 2012] 3208.407000 total counts/ 693.797000 bgd. counts: snr = 95.467254
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.168834 pixels
  Position = (291.3, 274.7) = 11 24 8.69 6 12 54.7
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2514.6 +/- 56.6
  Background counts = 693.8
  Rate = 0.3 +/- 0.007
[Fri Aug 17 11:04:16 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:04:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:04:16 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 11:04:16 2012] Source does appear to be extended
[Fri Aug 17 11:04:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 11:37:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 11:37:06 2012] Initial guess for spatial extent in simple fitting = 5.33"
[Fri Aug 17 11:37:06 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.756
[Fri Aug 17 11:37:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Fri Aug 17 11:43:13 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 17 11:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 11:43:13 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 17 11:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 17 11:43:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:43:13 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 17 11:43:13 2012] fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 17 11:43:13 2012] Fit fullrun_mos2_xmm0103863201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 17 11:43:17 2012] Spatial fit model total counts = 3210.600000, observed total counts = 3156.000000
[Fri Aug 17 11:43:17 2012] Offset between fit and detection position for source 1 = 0.011179 pixels
[Fri Aug 17 11:43:17 2012] 3243.077000 total counts/ 732.527000 bgd. counts: snr = 92.759213
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011179 pixels
  Position = (291.3, 274.7) = 11 24 8.69 6 12 54.7
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2510.6 +/- 56.9
  Background counts = 732.5
  Rate = 0.3 +/- 0.007
[Fri Aug 17 11:43:17 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:43:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:43:17 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 11:43:17 2012] Source does appear to be extended
[Fri Aug 17 11:43:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 12:37:12 2012] Counts = 2510.550000, rescaling region sizes by 2.000000
[Fri Aug 17 12:37:12 2012] XMMSAS src. selection expression = ellipse(25294.502600, 23851.499400, 637.234818, 637.234818, 0.000000, X, Y)
[Fri Aug 17 12:37:12 2012] Writing source region out to fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 17 12:37:12 2012] Extracting stamp from image fullrun_mos2_xmm0103863201_pi300-10000_cl_sm2.00.img.gz, (255, 238) - (328, 311)
[Fri Aug 17 12:37:12 2012] XMMSAS bgd. selection expression = annulus(25294.502600, 23851.499400, 2124.116061, 4248.232122, X, Y) && !ellipse(26346.378174, 23769.263367, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 12:37:12 2012] Writing fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1.gif
[Fri Aug 17 12:37:13 2012] Mean detx,y = (-158.06, 39.63) 
[Fri Aug 17 12:37:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 12:37:39 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 12:37:40 2012] Setting source spectrum file to fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 17 12:37:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 17 12:54:22 2012] Updating aperture counts using extracted products
[Fri Aug 17 12:54:22 2012] Error reading totcts from fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 17 12:54:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 12:54:22 2012] Using photon index=1.80, rate=0.29, arf fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1.arf
[Fri Aug 17 12:54:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 12:54:22 2012] Updating source flux to 3.3e-12
[Fri Aug 17 12:54:48 2012] Reading fit data from xmm0103863201/analysis//spectral/fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug 17 12:54:48 2012] Spectral fit parameter nH value = 1.41896e+20
[Fri Aug 17 12:54:48 2012] Spectral fit parameter PhoIndex value = 1.79759
[Fri Aug 17 12:54:48 2012] Failed to get F(0.3-8.0) from xmm0103863201/analysis//spectral/fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug 17 12:54:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 12:54:48 2012] Using Nh = 1.4e+20, photon index=1.80, rate=0.29, arf fullrun_mos2_xmm0103863201_pi300-10000_pass1_cl_src1.arf
[Fri Aug 17 12:54:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 12:54:48 2012] Updating source flux to 3.4e-12