[Wed Apr 11 00:27:47 2012] Detection parameters:
  Position = (350.9, 327.1) = 22 36 54.20 34 26 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.1 +/- 9.9
  Background counts = 10.4
  Rate = 0.008 +/- 0.001

[Wed Apr 11 00:27:47 2012] Off-axis axis estimate = 4.33'
[Wed Apr 11 00:28:01 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:28:01 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Apr 11 00:28:01 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Wed Apr 11 00:28:01 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.60"
[Wed Apr 11 00:28:01 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src22.ximg exists
[Wed Apr 11 00:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src22.csv
[Wed Apr 11 00:28:01 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Apr 11 00:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src22.csv
[Wed Apr 11 00:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:28:02 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Apr 11 00:28:02 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Apr 11 00:28:02 2012] Fit fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Apr 11 00:28:07 2012] Spatial fit model total counts = 134.999000, observed total counts = 135.000000
[Wed Apr 11 00:28:07 2012] Offset between fit and detection position for source 22 = 0.055817 pixels
[Wed Apr 11 00:28:07 2012] 132.112700 total counts/ 93.590500 bgd. counts: snr = 3.981944
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.055817 pixels
  Position = (351.0, 327.1) = 22 36 54.18 34 26 25.8
  Extent = 5.3 (3.8-6.8)", rotation angle = 0
  Source counts = 38.5 +/- 11.5
  Background counts = 93.6
  Rate = 0.005 +/- 0.001
[Wed Apr 11 00:28:07 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:28:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:28:07 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:28:07 2012] Source does appear to be extended
[Wed Apr 11 00:28:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:28:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:28:17 2012] Initial guess for spatial extent in simple fitting = 5.30"
[Wed Apr 11 00:28:17 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.353
[Wed Apr 11 00:28:17 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 5.30"
[Wed Apr 11 00:28:18 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src22.ximg exists
[Wed Apr 11 00:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src22.csv
[Wed Apr 11 00:28:18 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed Apr 11 00:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src22.csv
[Wed Apr 11 00:28:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:28:18 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed Apr 11 00:28:18 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Apr 11 00:28:18 2012] Fit fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Wed Apr 11 00:28:23 2012] Warning, spatial fit 22 centroid is now closest to src. 10
[Wed Apr 11 00:28:23 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:28:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:28:23 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:28:23 2012] Source does appear to be extended
[Wed Apr 11 00:28:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:28:33 2012] XMMSAS src. selection expression = ellipse(30487.386680, 28405.327800, 318.228009, 318.228009, 0.000000, X, Y)
[Wed Apr 11 00:28:33 2012] Not overwriting source region fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_src.reg
[Wed Apr 11 00:28:33 2012] Extracting stamp from image fullrun_pn_xmm0103863101_pi300-10000_cl_sm2.00.img.gz, (333, 309) - (369, 345)
[Wed Apr 11 00:28:33 2012] XMMSAS bgd. selection expression = annulus(30487.386680, 28405.327800, 530.380015, 1060.760031, X, Y)
[Wed Apr 11 00:28:33 2012] Writing fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22.gif
[Wed Apr 11 00:28:36 2012] ../../xmm0103863101/products/events/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0103863101/products/events/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed Apr 11 00:28:36 2012] Mean detx,y = (2254.11, -2553.47) 
[Wed Apr 11 00:28:36 2012] ../../xmm0103863101/products/images/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_src.img and ../../xmm0103863101/products/images/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed Apr 11 00:28:36 2012] ../../xmm0103863101/products/spectra/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0103863101/products/spectra/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed Apr 11 00:28:36 2012] Setting source spectrum file to fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Apr 11 00:28:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Apr 11 00:28:36 2012] ../../xmm0103863101/products/lightcurves/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0103863101/products/lightcurves/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed Apr 11 00:28:37 2012] Not generating rmf since there are only 38 counts
[Wed Apr 11 00:28:37 2012] rmf not generated due to insufficient counts
[Wed Apr 11 00:28:37 2012] fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Wed Apr 11 00:28:46 2012] Updating aperture counts using extracted products
[Wed Apr 11 00:28:46 2012] Error reading totcts from fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Apr 11 00:28:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 00:28:48 2012] Using photon index=1.80, rate=0.00472, arf fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src22.arf
[Wed Apr 11 00:28:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 00:28:48 2012] Updating source flux to 1.7e-14
[Wed Apr 11 00:28:53 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting