[Wed Apr 11 00:27:47 2012] Detection parameters:
  Position = (323.1, 306.0) = 22 37 3.99 34 24 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 591.0 +/- 30.1
  Background counts = 11.2
  Rate = 0.08 +/- 0.004

[Wed Apr 11 00:27:47 2012] Off-axis axis estimate = 1.87'
[Wed Apr 11 00:28:01 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:28:01 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Wed Apr 11 00:28:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Wed Apr 11 00:28:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Wed Apr 11 00:28:01 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Apr 11 00:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 00:28:01 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Apr 11 00:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 00:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:28:01 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Apr 11 00:28:01 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Apr 11 00:28:01 2012] Fit fullrun_pn_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Apr 11 00:28:07 2012] Spatial fit model total counts = 1255.990000, observed total counts = 1255.000000
[Wed Apr 11 00:28:07 2012] Offset between fit and detection position for source 1 = 0.430471 pixels
[Wed Apr 11 00:28:07 2012] 1228.422000 total counts/ 425.922000 bgd. counts: snr = 38.884812
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.430471 pixels
  Position = (322.8, 306.4) = 22 37 4.08 34 24 56.0
  Extent = 14.3 (13.4-14.7)", rotation angle = 0
  Source counts = 802.5 +/- 35.0
  Background counts = 425.9
  Rate = 0.1 +/- 0.004
[Wed Apr 11 00:28:07 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:28:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:28:07 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:28:07 2012] Source does appear to be extended
[Wed Apr 11 00:28:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:28:07 2012] Source is confused with source 7
[Wed Apr 11 00:28:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:28:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 00:28:17 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Wed Apr 11 00:28:17 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.979
[Wed Apr 11 00:28:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.28"
[Wed Apr 11 00:28:17 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Apr 11 00:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 00:28:18 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Apr 11 00:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 00:28:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:28:18 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Apr 11 00:28:18 2012] fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Apr 11 00:28:18 2012] Fit fullrun_pn_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Apr 11 00:28:23 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Wed Apr 11 00:28:23 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:28:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:28:23 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:28:23 2012] Source does appear to be extended
[Wed Apr 11 00:28:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:28:33 2012] XMMSAS src. selection expression = ellipse(28039.277660, 26608.315800, 856.686025, 856.686025, 0.000000, X, Y)
[Wed Apr 11 00:28:33 2012] Not overwriting source region fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_src.reg
[Wed Apr 11 00:28:33 2012] Extracting stamp from image fullrun_pn_xmm0103863101_pi300-10000_cl_sm2.00.img.gz, (274, 257) - (372, 356)
[Wed Apr 11 00:28:33 2012] XMMSAS bgd. selection expression = annulus(28039.277660, 26608.315800, 1427.810041, 2855.620082, X, Y) && !ellipse(27453.152320, 28341.344200, 320.684809, 320.684809, 0.000000, X, Y) && !ellipse(27961.580000, 26818.842000, 1310.504038, 986.896028, 90.000000, X, Y) && !ellipse(26769.770400, 26694.413000, 430.700012, 430.700012, 0.000000, X, Y) && !ellipse(27643.803375, 25721.445343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.580600, 28943.131600, 297.170409, 297.170409, 0.000000, X, Y) && !ellipse(30487.386680, 28405.327800, 424.304012, 424.304012, 0.000000, X, Y) && !ellipse(26519.982574, 25203.892517, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 00:28:33 2012] Writing fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1.gif
[Wed Apr 11 00:28:35 2012] ../../xmm0103863101/products/events/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0103863101/products/events/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Apr 11 00:28:35 2012] Mean detx,y = (623.99, 30.57) 
[Wed Apr 11 00:28:35 2012] ../../xmm0103863101/products/images/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0103863101/products/images/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Apr 11 00:28:35 2012] ../../xmm0103863101/products/spectra/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0103863101/products/spectra/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Apr 11 00:28:35 2012] Setting source spectrum file to fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Apr 11 00:28:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Apr 11 00:28:35 2012] ../../xmm0103863101/products/lightcurves/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0103863101/products/lightcurves/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Apr 11 00:28:37 2012] fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Wed Apr 11 00:28:37 2012] fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed Apr 11 00:28:46 2012] Updating aperture counts using extracted products
[Wed Apr 11 00:28:46 2012] Error reading totcts from fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Apr 11 00:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 00:28:47 2012] Using photon index=1.80, rate=0.0983, arf fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1.arf
[Wed Apr 11 00:28:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 00:28:47 2012] Updating source flux to 2.3e-13
[Wed Apr 11 00:28:53 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Apr 11 00:28:54 2012] Reading fit data from xmm0103863101/analysis//spectral/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Apr 11 00:28:54 2012] Spectral fit parameter nH value = 1.631e+21
[Wed Apr 11 00:28:54 2012] Spectral fit parameter PhoIndex value = 2.53633
[Wed Apr 11 00:28:54 2012] Failed to get F(0.3-8.0) from xmm0103863101/analysis//spectral/fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Apr 11 00:28:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 00:28:54 2012] Using Nh = 1.6e+21, photon index=2.54, rate=0.0983, arf fullrun_pn_xmm0103863101_pi300-10000_pass1_cl_src1.arf
[Wed Apr 11 00:28:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 00:28:54 2012] Updating source flux to 2.1e-13