[Wed Apr 11 00:27:49 2012] Detection parameters:
  Position = (316.2, 325.5) = 22 37 6.40 34 26 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.4 +/- 10.0
  Background counts = 10.6
  Rate = 0.005 +/- 0.0009

[Wed Apr 11 00:27:49 2012] Off-axis axis estimate = 2.35'
[Wed Apr 11 00:28:02 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:28:02 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Wed Apr 11 00:28:02 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Wed Apr 11 00:28:02 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.60"
[Wed Apr 11 00:28:03 2012] fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Apr 11 00:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_src11.csv
[Wed Apr 11 00:28:03 2012] fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Apr 11 00:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_src11.csv
[Wed Apr 11 00:28:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:28:03 2012] fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Apr 11 00:28:03 2012] fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Apr 11 00:28:03 2012] Fit fullrun_mos2_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Apr 11 00:28:11 2012] Source 14 is offset by 7.225457 and 6.440270 pixels which is larger than
2 X fitted extent = 0.873710 x 0.873710, not incorporating fit results
[Wed Apr 11 00:28:11 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:28:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:28:11 2012] Assessing source extent using major
[Wed Apr 11 00:28:11 2012] Source does appear to be extended
[Wed Apr 11 00:28:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:28:19 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:28:19 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Wed Apr 11 00:28:19 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Wed Apr 11 00:28:19 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.60"
[Wed Apr 11 00:28:19 2012] fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Apr 11 00:28:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_src11.csv
[Wed Apr 11 00:28:19 2012] fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Apr 11 00:28:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_src11.csv
[Wed Apr 11 00:28:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:28:19 2012] fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Apr 11 00:28:19 2012] fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Apr 11 00:28:19 2012] Fit fullrun_mos2_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Apr 11 00:28:26 2012] Source 14 is offset by 7.225457 and 6.440270 pixels which is larger than
2 X fitted extent = 0.873710 x 0.873710, not incorporating fit results
[Wed Apr 11 00:28:26 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 158.078521 pixels away
[Wed Apr 11 00:28:26 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:28:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:28:26 2012] Assessing source extent using major
[Wed Apr 11 00:28:26 2012] Source does appear to be extended
[Wed Apr 11 00:28:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:28:38 2012] XMMSAS src. selection expression = ellipse(27464.012756, 28265.701508, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 00:28:38 2012] Not overwriting source region fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_src.reg
[Wed Apr 11 00:28:38 2012] Extracting stamp from image fullrun_mos2_xmm0103863101_pi300-10000_cl_sm2.00.img.gz, (279, 288) - (354, 363)
[Wed Apr 11 00:28:38 2012] XMMSAS bgd. selection expression = annulus(27464.012756, 28265.701508, 1087.500000, 2175.000000, X, Y) && !ellipse(28044.712000, 26585.496000, 1658.952048, 1024.128029, 52.829000, X, Y) && !ellipse(28226.831131, 26305.343418, 783.909220, 280.532906, 90.000000, X, Y) && !ellipse(27747.198000, 27282.326000, 741.910421, 741.910421, 0.000000, X, Y) && !ellipse(26744.916720, 26692.270600, 332.005610, 140.988804, 52.949100, X, Y) && !ellipse(27683.825287, 28900.423431, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 00:28:38 2012] Writing fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14.gif
[Wed Apr 11 00:28:39 2012] ../../xmm0103863101/products/events/fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0103863101/products/events/fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Wed Apr 11 00:28:39 2012] Mean detx,y = (631.49, 1159.28) 
[Wed Apr 11 00:28:39 2012] ../../xmm0103863101/products/images/fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_src.img and ../../xmm0103863101/products/images/fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Wed Apr 11 00:28:39 2012] ../../xmm0103863101/products/spectra/fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0103863101/products/spectra/fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Wed Apr 11 00:28:39 2012] Setting source spectrum file to fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Apr 11 00:28:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Apr 11 00:28:39 2012] ../../xmm0103863101/products/lightcurves/fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0103863101/products/lightcurves/fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Wed Apr 11 00:28:39 2012] Not generating rmf since there are only 52 counts
[Wed Apr 11 00:28:39 2012] rmf not generated due to insufficient counts
[Wed Apr 11 00:28:39 2012] fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14.arf exists, delete to re-create
[Wed Apr 11 00:28:49 2012] Updating aperture counts using extracted products
[Wed Apr 11 00:28:49 2012] Error reading totcts from fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Apr 11 00:28:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 00:28:49 2012] Using photon index=1.80, rate=0.00481, arf fullrun_mos2_xmm0103863101_pi300-10000_pass1_cl_src14.arf
[Wed Apr 11 00:28:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 00:28:49 2012] Updating source flux to 4.9e-14
[Wed Apr 11 00:28:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting