[Wed Apr 11 00:27:47 2012] Detection parameters:
  Position = (323.9, 306.0) = 22 37 3.72 34 24 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.7 +/- 20.0
  Background counts = 10.4
  Rate = 0.02 +/- 0.002

[Wed Apr 11 00:27:48 2012] Off-axis axis estimate = 1.92'
[Wed Apr 11 00:28:02 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:28:02 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Wed Apr 11 00:28:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Wed Apr 11 00:28:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.39"
[Wed Apr 11 00:28:02 2012] fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Apr 11 00:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 00:28:02 2012] fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Apr 11 00:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 00:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:28:02 2012] fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Apr 11 00:28:02 2012] fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Apr 11 00:28:02 2012] Fit fullrun_mos1_xmm0103863101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Apr 11 00:28:09 2012] Spatial fit model total counts = 549.000000, observed total counts = 549.000000
[Wed Apr 11 00:28:09 2012] Offset between fit and detection position for source 1 = 0.608895 pixels
[Wed Apr 11 00:28:09 2012] 530.323000 total counts/ 106.082000 bgd. counts: snr = 41.190000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.608895 pixels
  Position = (323.3, 306.3) = 22 37 3.91 34 24 55.6
  Extent = 14.8 (14.7-29.6)", rotation angle = 0
  Source counts = 424.2 +/- 23.0
  Background counts = 106.1
  Rate = 0.04 +/- 0.002
[Wed Apr 11 00:28:09 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:28:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:28:09 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:28:09 2012] Source does appear to be extended
[Wed Apr 11 00:28:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:28:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:28:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 00:28:18 2012] Initial guess for spatial extent in simple fitting = 14.78"
[Wed Apr 11 00:28:18 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.053
[Wed Apr 11 00:28:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.78"
[Wed Apr 11 00:28:18 2012] fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Apr 11 00:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 00:28:18 2012] fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Apr 11 00:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 00:28:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:28:19 2012] fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Apr 11 00:28:19 2012] fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Apr 11 00:28:19 2012] Fit fullrun_mos1_xmm0103863101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Apr 11 00:28:25 2012] Spatial fit model total counts = 840.192000, observed total counts = 840.000000
[Wed Apr 11 00:28:25 2012] Offset between fit and detection position for source 1 = 0.271598 pixels
[Wed Apr 11 00:28:25 2012] 793.429000 total counts/ 318.272000 bgd. counts: snr = 26.634093
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.271598 pixels
  Position = (323.1, 306.3) = 22 37 4.00 34 24 55.7
  Extent = 16.4 (14.8-18.7)", rotation angle = 0
  Source counts = 475.2 +/- 28.2
  Background counts = 318.3
  Rate = 0.04 +/- 0.003
[Wed Apr 11 00:28:25 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:28:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:28:25 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:28:25 2012] Source does appear to be extended
[Wed Apr 11 00:28:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:28:25 2012] Source is confused with source 10
[Wed Apr 11 00:28:37 2012] XMMSAS src. selection expression = ellipse(28057.796800, 26601.120260, 986.220028, 986.220028, 0.000000, X, Y)
[Wed Apr 11 00:28:37 2012] Not overwriting source region fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_src.reg
[Wed Apr 11 00:28:37 2012] Extracting stamp from image fullrun_mos1_xmm0103863101_pi300-10000_cl_sm2.00.img.gz, (266, 250) - (380, 363)
[Wed Apr 11 00:28:37 2012] XMMSAS bgd. selection expression = annulus(28057.796800, 26601.120260, 1643.700047, 3287.400095, X, Y) && !ellipse(27627.039520, 25787.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.538600, 25254.973480, 480.302414, 480.302414, 0.000000, X, Y) && !ellipse(26502.733160, 25243.150200, 484.362414, 184.012005, 115.879900, X, Y)
[Wed Apr 11 00:28:37 2012] Writing fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1.gif
[Wed Apr 11 00:28:37 2012] ../../xmm0103863101/products/events/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0103863101/products/events/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Apr 11 00:28:37 2012] Mean detx,y = (52.22, 297.06) 
[Wed Apr 11 00:28:37 2012] ../../xmm0103863101/products/images/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0103863101/products/images/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Apr 11 00:28:37 2012] ../../xmm0103863101/products/spectra/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0103863101/products/spectra/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Apr 11 00:28:37 2012] Setting source spectrum file to fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Apr 11 00:28:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Apr 11 00:28:37 2012] ../../xmm0103863101/products/lightcurves/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0103863101/products/lightcurves/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Apr 11 00:28:38 2012] fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Wed Apr 11 00:28:38 2012] fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed Apr 11 00:28:48 2012] Updating aperture counts using extracted products
[Wed Apr 11 00:28:48 2012] Error reading totcts from fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Apr 11 00:28:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 00:28:48 2012] Using photon index=1.80, rate=0.0431, arf fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1.arf
[Wed Apr 11 00:28:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 00:28:48 2012] Updating source flux to 4e-13
[Wed Apr 11 00:28:50 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Apr 11 00:28:52 2012] Reading fit data from xmm0103863101/analysis//spectral/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Apr 11 00:28:52 2012] Spectral fit parameter nH value = 8.28855e+20
[Wed Apr 11 00:28:52 2012] Spectral fit parameter PhoIndex value = 2.1766
[Wed Apr 11 00:28:52 2012] Failed to get F(0.3-8.0) from xmm0103863101/analysis//spectral/fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Apr 11 00:28:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 00:28:52 2012] Using Nh = 8.3e+20, photon index=2.18, rate=0.0431, arf fullrun_mos1_xmm0103863101_pi300-10000_pass1_cl_src1.arf
[Wed Apr 11 00:28:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 00:28:52 2012] Updating source flux to 3.6e-13