[Thu Jun 21 10:13:10 2012] Detection parameters:
  Position = (280.6, 281.1) = 4 51 41.49 -3 48 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12072.1 +/- 129.6
  Background counts = 5.4
  Rate = 2 +/- 0.02

[Thu Jun 21 10:13:11 2012] Off-axis axis estimate = 1.81'
[Thu Jun 21 11:01:13 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 11:01:13 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Thu Jun 21 11:01:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Thu Jun 21 11:01:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Thu Jun 21 11:21:42 2012] fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 21 11:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 11:21:42 2012] fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 21 11:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 11:21:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 11:21:42 2012] fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 21 11:21:42 2012] fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 21 11:21:42 2012] Fit fullrun_mos2_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 21 11:21:52 2012] Spatial fit model total counts = 10777.200000, observed total counts = 10589.000000
[Thu Jun 21 11:21:52 2012] Offset between fit and detection position for source 1 = 0.073099 pixels
[Thu Jun 21 11:21:52 2012] 10777.600000 total counts/ 2232.040000 bgd. counts: snr = 180.879580
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.073099 pixels
  Position = (280.6, 281.1) = 4 51 41.48 -3 48 32.9
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 8545.6 +/- 103.8
  Background counts = 2232.0
  Rate = 1 +/- 0.02
[Thu Jun 21 11:21:52 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 11:21:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 11:21:52 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 11:21:52 2012] Source does appear to be extended
[Thu Jun 21 11:21:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 11:50:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 11:50:05 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Thu Jun 21 11:50:05 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.991
[Thu Jun 21 11:50:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Thu Jun 21 12:03:56 2012] fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 21 12:03:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 12:03:56 2012] fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 21 12:03:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 12:03:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 12:03:56 2012] fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 21 12:03:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 21 12:03:56 2012] fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 21 12:03:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 21 12:03:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 12:04:05 2012] Warning, spatial fit 1 centroid is now closest to src. 10
[Thu Jun 21 12:04:05 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 12:04:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 12:04:05 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 12:04:05 2012] Source does appear to be extended
[Thu Jun 21 12:04:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 12:24:42 2012] Counts = 8545.560000, rescaling region sizes by 2.000000
[Thu Jun 21 12:24:42 2012] XMMSAS src. selection expression = ellipse(24364.347200, 24410.612600, 647.353219, 647.353219, 0.000000, X, Y)
[Thu Jun 21 12:24:42 2012] Writing source region out to fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 21 12:24:42 2012] Extracting stamp from image fullrun_mos2_xmm0103863001_pi300-10000_cl_sm2.00.img.gz, (243, 244) - (318, 318)
[Thu Jun 21 12:24:42 2012] XMMSAS bgd. selection expression = annulus(24364.347200, 24410.612600, 2157.844062, 4315.688124, X, Y)
[Thu Jun 21 12:24:42 2012] Writing fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1.gif
[Thu Jun 21 12:24:44 2012] Mean detx,y = (-62.88, 128.92) 
[Thu Jun 21 12:24:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 12:25:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 12:25:19 2012] Setting source spectrum file to fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 12:25:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 21 12:31:21 2012] Updating aperture counts using extracted products
[Thu Jun 21 12:31:21 2012] Error reading totcts from fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 12:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 12:31:21 2012] Using photon index=1.80, rate=1.29, arf fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 12:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 12:31:21 2012] Updating source flux to 1.7e-11
[Thu Jun 21 12:31:50 2012] Reading fit data from xmm0103863001/analysis//spectral/fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 21 12:31:50 2012] Spectral fit parameter nH value = 4.49749e+20
[Thu Jun 21 12:31:50 2012] Spectral fit parameter PhoIndex value = 1.81827
[Thu Jun 21 12:31:50 2012] Failed to get F(0.3-8.0) from xmm0103863001/analysis//spectral/fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 21 12:31:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 12:31:50 2012] Using Nh = 4.5e+20, photon index=1.82, rate=1.29, arf fullrun_mos2_xmm0103863001_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 12:31:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 12:31:50 2012] Updating source flux to 1.7e-11