[Thu Jun 21 10:12:51 2012] Detection parameters:
  Position = (306.8, 363.0) = 4 51 33.87 -3 42 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.9 +/- 14.2
  Background counts = 15.5
  Rate = 0.03 +/- 0.003

[Thu Jun 21 10:12:51 2012] Off-axis axis estimate = 4.72'
[Thu Jun 21 10:49:41 2012] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 10:49:41 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Thu Jun 21 10:49:41 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.984
[Thu Jun 21 10:49:41 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.79"
[Thu Jun 21 11:01:13 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 21 11:01:13 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 21 11:01:13 2012] Fit fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Jun 21 11:01:13 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 21 11:01:13 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 21 11:01:13 2012] Fit fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 21 11:21:49 2012] Spatial fit model total counts = 147.250000, observed total counts = 142.000000
[Thu Jun 21 11:21:49 2012] Offset between fit and detection position for source 3 = 0.710721 pixels
[Thu Jun 21 11:21:49 2012] 147.288600 total counts/ 68.111300 bgd. counts: snr = 9.593810
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.710721 pixels
  Position = (306.2, 362.7) = 4 51 34.06 -3 42 38.0
  Extent = 7.0 (5.1-8.6)", rotation angle = 0
  Source counts = 79.2 +/- 12.1
  Background counts = 68.1
  Rate = 0.02 +/- 0.002
[Thu Jun 21 11:21:49 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 11:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 11:21:49 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 11:21:49 2012] Source does appear to be extended
[Thu Jun 21 11:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 11:40:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 11:40:13 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Thu Jun 21 11:40:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Thu Jun 21 11:40:13 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.99"
[Thu Jun 21 11:50:04 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 21 11:50:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src3.csv
[Thu Jun 21 11:50:04 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 21 11:50:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src3.csv
[Thu Jun 21 11:50:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 11:50:05 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 21 11:50:05 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 21 11:50:05 2012] Fit fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 21 12:04:03 2012] Spatial fit model total counts = 146.407000, observed total counts = 138.000000
[Thu Jun 21 12:04:03 2012] Offset between fit and detection position for source 3 = 0.013336 pixels
[Thu Jun 21 12:04:03 2012] 146.940900 total counts/ 67.633000 bgd. counts: snr = 9.643554
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.013336 pixels
  Position = (306.1, 362.7) = 4 51 34.06 -3 42 38.0
  Extent = 7.0 (5.2-8.6)", rotation angle = 0
  Source counts = 79.3 +/- 12.1
  Background counts = 67.6
  Rate = 0.02 +/- 0.002
[Thu Jun 21 12:04:03 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 12:04:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 12:04:03 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 12:04:03 2012] Source does appear to be extended
[Thu Jun 21 12:04:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 12:17:09 2012] XMMSAS src. selection expression = ellipse(26586.416600, 31509.075400, 419.285412, 419.285412, 0.000000, X, Y)
[Thu Jun 21 12:17:09 2012] Writing source region out to fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 21 12:17:09 2012] Extracting stamp from image fullrun_mos1_xmm0103863001_pi300-10000_cl_sm2.00.img.gz, (282, 339) - (330, 387)
[Thu Jun 21 12:17:09 2012] XMMSAS bgd. selection expression = annulus(26586.416600, 31509.075400, 698.809020, 1397.618040, X, Y)
[Thu Jun 21 12:17:09 2012] Writing fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src3.gif
[Thu Jun 21 12:17:56 2012] Mean detx,y = (-7024.53, -1044.07) 
[Thu Jun 21 12:17:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 12:18:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 12:18:10 2012] Setting source spectrum file to fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 21 12:18:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 21 12:24:26 2012] Not generating rmf since there are only 79 counts
[Thu Jun 21 12:24:26 2012] rmf not generated due to insufficient counts
[Thu Jun 21 12:31:20 2012] Updating aperture counts using extracted products
[Thu Jun 21 12:31:20 2012] Error reading totcts from fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 21 12:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 12:31:21 2012] Using photon index=1.80, rate=0.0152, arf fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src3.arf
[Thu Jun 21 12:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 12:31:21 2012] Updating source flux to 2.2e-13
[Thu Jun 21 12:31:23 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting