[Thu Jun 21 10:12:51 2012] Detection parameters:
  Position = (280.6, 281.1) = 4 51 41.49 -3 48 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13569.6 +/- 137.7
  Background counts = 21.8
  Rate = 2 +/- 0.02

[Thu Jun 21 10:12:51 2012] Off-axis axis estimate = 1.80'
[Thu Jun 21 10:49:41 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 10:49:41 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Thu Jun 21 10:49:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Thu Jun 21 10:49:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Thu Jun 21 11:01:13 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 21 11:01:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 11:01:13 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 21 11:01:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 11:01:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 11:01:13 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 21 11:01:13 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 21 11:01:13 2012] Fit fullrun_mos1_xmm0103863001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 21 11:21:49 2012] Spatial fit model total counts = 9463.530000, observed total counts = 9455.000000
[Thu Jun 21 11:21:49 2012] Offset between fit and detection position for source 1 = 0.111208 pixels
[Thu Jun 21 11:21:49 2012] 9489.100000 total counts/ 2057.380000 bgd. counts: snr = 163.844581
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.111208 pixels
  Position = (280.6, 281.2) = 4 51 41.49 -3 48 32.5
  Extent = 5.5 (5.3-5.6)", rotation angle = 0
  Source counts = 7431.7 +/- 97.4
  Background counts = 2057.4
  Rate = 1 +/- 0.02
[Thu Jun 21 11:21:49 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 11:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 11:21:49 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 11:21:49 2012] Source does appear to be extended
[Thu Jun 21 11:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 11:40:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 11:40:13 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Thu Jun 21 11:40:13 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.973
[Thu Jun 21 11:40:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Thu Jun 21 11:50:04 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 21 11:50:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 11:50:04 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 21 11:50:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src1.csv
[Thu Jun 21 11:50:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 11:50:04 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 21 11:50:05 2012] fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 21 11:50:05 2012] Fit fullrun_mos1_xmm0103863001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 21 12:04:03 2012] Spatial fit model total counts = 9464.200000, observed total counts = 9455.000000
[Thu Jun 21 12:04:03 2012] Offset between fit and detection position for source 1 = 0.000999 pixels
[Thu Jun 21 12:04:03 2012] 9489.700000 total counts/ 2056.050000 bgd. counts: snr = 163.940129
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000999 pixels
  Position = (280.6, 281.2) = 4 51 41.49 -3 48 32.5
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 7433.6 +/- 97.4
  Background counts = 2056.1
  Rate = 1 +/- 0.02
[Thu Jun 21 12:04:03 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 12:04:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 12:04:03 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 12:04:03 2012] Source does appear to be extended
[Thu Jun 21 12:04:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 12:17:09 2012] Counts = 7433.650000, rescaling region sizes by 2.000000
[Thu Jun 21 12:17:09 2012] XMMSAS src. selection expression = ellipse(24362.612200, 24418.792800, 655.948819, 655.948819, 0.000000, X, Y)
[Thu Jun 21 12:17:09 2012] Writing source region out to fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 21 12:17:09 2012] Extracting stamp from image fullrun_mos1_xmm0103863001_pi300-10000_cl_sm2.00.img.gz, (243, 244) - (318, 319)
[Thu Jun 21 12:17:09 2012] XMMSAS bgd. selection expression = annulus(24362.612200, 24418.792800, 2186.496063, 4372.992126, X, Y)
[Thu Jun 21 12:17:09 2012] Writing fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1.gif
[Thu Jun 21 12:17:12 2012] Mean detx,y = (337.04, -94.35) 
[Thu Jun 21 12:17:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 12:17:43 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 12:17:43 2012] Setting source spectrum file to fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 12:17:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 21 12:31:20 2012] Updating aperture counts using extracted products
[Thu Jun 21 12:31:20 2012] Error reading totcts from fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 21 12:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 12:31:21 2012] Using photon index=1.80, rate=1.43, arf fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 12:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 12:31:21 2012] Updating source flux to 1.4e-11
[Thu Jun 21 12:31:36 2012] Reading fit data from xmm0103863001/analysis//spectral/fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 21 12:31:36 2012] Spectral fit parameter nH value = 3.2835e+20
[Thu Jun 21 12:31:36 2012] Spectral fit parameter PhoIndex value = 1.79003
[Thu Jun 21 12:31:36 2012] Failed to get F(0.3-8.0) from xmm0103863001/analysis//spectral/fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 21 12:31:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 12:31:36 2012] Using Nh = 3.3e+20, photon index=1.79, rate=1.43, arf fullrun_mos1_xmm0103863001_pi300-10000_pass1_cl_src1.arf
[Thu Jun 21 12:31:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 12:31:36 2012] Updating source flux to 1.5e-11