[Thu Mar 29 10:31:42 2012] Detection parameters:
  Position = (332.9, 399.0) = 4 51 34.60 -3 42 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 8.0
  Background counts = 1.2
  Rate = 0.006 +/- 0.001

[Thu Mar 29 10:31:42 2012] Off-axis axis estimate = 7.71'
[Thu Mar 29 11:09:13 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:09:13 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Thu Mar 29 11:09:13 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.915
[Thu Mar 29 11:09:13 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.28"
[Thu Mar 29 11:48:04 2012] fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_src4.ximg exists
[Thu Mar 29 11:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_src4.csv
[Thu Mar 29 11:48:04 2012] fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Mar 29 11:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_src4.csv
[Thu Mar 29 11:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:48:04 2012] fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Mar 29 11:48:04 2012] fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Mar 29 11:48:04 2012] Fit fullrun_mos2_xmm0103862701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Mar 29 11:48:15 2012] Spatial fit model total counts = 56.277100, observed total counts = 53.000000
[Thu Mar 29 11:48:15 2012] Offset between fit and detection position for source 8 = 0.462128 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.462128 pixels
  Position = (333.2, 399.4) = 4 51 34.52 -3 42 41.0
  Extent = 9.2 (7.4-11.5)", rotation angle = 0
  Source counts = 55.4 +/- 7.4
  Background counts = 0.0
  Rate = 0.007 +/- 0.001
 Deleting source due to low signal-to-noise ratio