[Sat Sep  1 03:19:47 2012] Detection parameters:
  Position = (442.0, 253.0) = 11 0 20.03 10 57 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.4 +/- 7.2
  Background counts = 2.4
  Rate = 0.007 +/- 0.002

[Sat Sep  1 03:19:47 2012] Off-axis axis estimate = 10.92'
[Sat Sep  1 04:18:04 2012] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 04:18:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep  1 04:18:04 2012] Initial guess for spatial extent in simple fitting = 11.89"
[Sat Sep  1 04:18:04 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.861
[Sat Sep  1 04:18:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.89"
[Sat Sep  1 04:22:23 2012] fullrun_mos2_xmm0103861801_pi300-10000_cl_pass0_src2.ximg exists
[Sat Sep  1 04:22:23 2012] fullrun_mos2_xmm0103861801_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Sep  1 04:22:23 2012] Fit fullrun_mos2_xmm0103861801_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Sep  1 04:22:23 2012] fullrun_mos2_xmm0103861801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Sep  1 04:22:23 2012] fullrun_mos2_xmm0103861801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Sep  1 04:22:23 2012] Fit fullrun_mos2_xmm0103861801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Sep  1 04:22:28 2012] Spatial fit model total counts = 45.085200, observed total counts = 45.000000
[Sat Sep  1 04:22:28 2012] Offset between fit and detection position for source 3 = 0.376143 pixels
[Sat Sep  1 04:22:28 2012] 45.099500 total counts/ 20.318700 bgd. counts: snr = 5.497527
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.376143 pixels
  Position = (441.7, 252.8) = 11 0 20.13 10 57 50.8
  Extent = 6.3 (3.7-8.7)", rotation angle = 0
  Source counts = 24.8 +/- 6.7
  Background counts = 20.3
  Rate = 0.003 +/- 0.0007
[Sat Sep  1 04:22:28 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 04:22:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 04:22:28 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 04:22:28 2012] Source does appear to be extended
[Sat Sep  1 04:22:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 04:57:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep  1 04:57:45 2012] Initial guess for spatial extent in simple fitting = 6.33"
[Sat Sep  1 04:57:45 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.046
[Sat Sep  1 04:57:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.33"
[Sat Sep  1 05:00:40 2012] fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep  1 05:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 05:00:40 2012] fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep  1 05:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 05:00:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 05:00:40 2012] fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep  1 05:00:40 2012] fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep  1 05:00:40 2012] Fit fullrun_mos2_xmm0103861801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep  1 05:00:44 2012] Spatial fit model total counts = 44.054400, observed total counts = 44.000000
[Sat Sep  1 05:00:44 2012] Offset between fit and detection position for source 3 = 0.033205 pixels
[Sat Sep  1 05:00:44 2012] 44.057300 total counts/ 19.348800 bgd. counts: snr = 5.617193
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.033205 pixels
  Position = (441.7, 252.8) = 11 0 20.12 10 57 50.7
  Extent = 6.3 (3.6-8.7)", rotation angle = 0
  Source counts = 24.7 +/- 6.6
  Background counts = 19.3
  Rate = 0.003 +/- 0.0007
[Sat Sep  1 05:00:44 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 05:00:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 05:00:44 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 05:00:44 2012] Source does appear to be extended
[Sat Sep  1 05:00:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 05:11:08 2012] XMMSAS src. selection expression = ellipse(38382.327600, 21944.334620, 380.017259, 380.017259, 0.000000, X, Y)
[Sat Sep  1 05:11:08 2012] Writing source region out to fullrun_mos2_xmm0103861801_pi300-10000_pass1_cl_src3_src.reg
[Sat Sep  1 05:11:08 2012] Extracting stamp from image fullrun_mos2_xmm0103861801_pi300-10000_cl_sm2.00.img.gz, (420, 231) - (464, 275)
[Sat Sep  1 05:11:08 2012] XMMSAS bgd. selection expression = annulus(38382.327600, 21944.334620, 633.362099, 1266.724198, X, Y)
[Sat Sep  1 05:11:08 2012] Writing fullrun_mos2_xmm0103861801_pi300-10000_pass1_cl_src3.gif
[Sat Sep  1 05:11:09 2012] Mean detx,y = (-8695.97, -10203.59) 
[Sat Sep  1 05:11:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 05:11:14 2012] grppha failed
[Sat Sep  1 05:11:14 2012] Setting source spectrum file to fullrun_mos2_xmm0103861801_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Sep  1 05:11:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103861801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Sep  1 05:11:39 2012] Not generating rmf since there are only 24 counts
[Sat Sep  1 05:11:39 2012] rmf not generated due to insufficient counts
[Sat Sep  1 05:11:50 2012] Updating aperture counts using extracted products
[Sat Sep  1 05:11:50 2012] Error reading totcts from fullrun_mos2_xmm0103861801_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Sep  1 05:11:50 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 05:11:52 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep  1 05:11:53 2012] xmm0103861801/analysis//spectral/fullrun_mos2_xmm0103861801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete