[Fri Jun  7 02:36:44 2013] Detection parameters:
  Position = (456.7, 283.9) = 4 31 31.43 -78 1 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.2 +/- 9.1
  Background counts = 3.6
  Rate = 0.01 +/- 0.002

[Fri Jun  7 02:36:44 2013] Off-axis axis estimate = 11.52'
[Fri Jun  7 02:38:40 2013] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 02:38:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 02:38:40 2013] Initial guess for spatial extent in simple fitting = 12.19"
[Fri Jun  7 02:38:40 2013] source mask rpix=2.8, npix_max = 43, mask sum = 38, frac = 0.871
[Fri Jun  7 02:38:40 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 12.19"
[Fri Jun  7 03:11:04 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun  7 03:11:04 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun  7 03:11:04 2013] Fit fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jun  7 03:11:05 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun  7 03:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun  7 03:11:05 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun  7 03:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun  7 03:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:45:06 2013] Spatial fit model total counts = 79.589400, observed total counts = 73.000000
[Fri Jun  7 03:45:06 2013] Offset between fit and detection position for source 7 = 0.195326 pixels
[Fri Jun  7 03:45:06 2013] 80.412400 total counts/ 38.906100 bgd. counts: snr = 6.654343
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.195326 pixels
  Position = (456.5, 283.7) = 4 31 31.62 -78 1 12.8
  Extent = 8.1 (6.0-10.9)" x 4.1 (3.0-6.3)", rotation angle = 79 (58-104) degrees
  Source counts = 41.5 +/- 9.0
  Background counts = 38.9
  Rate = 0.007 +/- 0.002
[Fri Jun  7 03:45:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:45:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:45:06 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 03:45:06 2013] Source does appear to be extended
[Fri Jun  7 03:45:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Fri Jun  7 03:45:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 03:45:23 2013] Initial guess for spatial extent in simple fitting = 6.10"
[Fri Jun  7 03:45:23 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.829
[Fri Jun  7 03:45:23 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 6.10"
[Fri Jun  7 04:07:35 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun  7 04:07:36 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun  7 04:07:36 2013] Fit fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Jun  7 04:07:36 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun  7 04:07:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun  7 04:07:36 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun  7 04:07:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun  7 04:07:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 04:40:14 2013] Spatial fit model total counts = 78.352300, observed total counts = 71.000000
[Fri Jun  7 04:40:14 2013] Offset between fit and detection position for source 7 = 0.021454 pixels
[Fri Jun  7 04:40:14 2013] 79.770100 total counts/ 39.356500 bgd. counts: snr = 6.441979
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.021454 pixels
  Position = (456.5, 283.8) = 4 31 31.65 -78 1 12.8
  Extent = 8.0 (5.9-10.8)" x 4.0 (4.0-4.1)", rotation angle = 80 (58-184) degrees
  Source counts = 40.4 +/- 8.9
  Background counts = 39.4
  Rate = 0.007 +/- 0.002
[Fri Jun  7 04:40:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 04:40:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 04:40:14 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 04:40:14 2013] Source does appear to be extended
[Fri Jun  7 04:40:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.45
[Fri Jun  7 04:40:30 2013] XMMSAS src. selection expression = ellipse(39669.351600, 24638.242000, 477.615614, 242.412007, 79.759800, X, Y)
[Fri Jun  7 04:40:30 2013] Writing source region out to fullrun_pn_xmm0103861701_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun  7 04:40:30 2013] Extracting stamp from image fullrun_pn_xmm0103861701_pi300-10000_cl_sm2.00.img.gz, (429, 256) - (484, 311)
[Fri Jun  7 04:40:30 2013] XMMSAS bgd. selection expression = annulus(39669.351600, 24638.242000, 796.026023, 1592.052046, X, Y) && !ellipse(38430.446655, 25883.282654, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  7 04:40:30 2013] Writing fullrun_pn_xmm0103861701_pi300-10000_pass1_cl_src7.gif
[Fri Jun  7 04:44:53 2013] Mean detx,y = (-12669.86, -6000.34) 
[Fri Jun  7 04:44:58 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 04:45:26 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 04:45:27 2013] Setting source spectrum file to fullrun_pn_xmm0103861701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun  7 04:45:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0103861701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun  7 04:55:41 2013] Not generating rmf since there are only 40 counts
[Fri Jun  7 04:55:41 2013] rmf not generated due to insufficient counts
[Fri Jun  7 05:15:18 2013] Updating aperture counts using extracted products
[Fri Jun  7 05:15:18 2013] Total counts from fullrun_pn_xmm0103861701_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 44.00
[Fri Jun  7 05:15:18 2013] Total counts from fullrun_pn_xmm0103861701_pi300-10000_pass1_cl_src7_bgd.pi.gz = 84.00
[Fri Jun  7 05:15:18 2013] Got source and background scale factors 297732.000000, 4940116.000000
[Fri Jun  7 05:15:18 2013] User source parameters:
  Position = (456.5, 283.8) = 4 31 31.65 -78 1 12.8
  Extent = 8.0 (5.9-10.8)" x 4.0 (4.0-4.1)", rotation angle = 80 (58-184) degrees
  Source aperture counts = 38.9 +/- 7.7
  Background aperture counts = 5.1
  Rate = 0.007 +/- 0.001

[Fri Jun  7 05:15:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 05:15:22 2013] Using photon index=1.80, rate=0.00722, arf fullrun_pn_xmm0103861701_pi300-10000_pass1_cl_src7.arf
[Fri Jun  7 05:15:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 05:15:22 2013] Updating source flux to 1.5e-13
[Fri Jun  7 05:15:36 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  7 05:15:40 2013] xmm0103861701/analysis//spectral/fullrun_pn_xmm0103861701_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete