[Fri Jun  7 02:36:44 2013] Detection parameters:
  Position = (449.3, 176.8) = 4 31 39.48 -78 9 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18.8 +/- 5.8
  Background counts = 3.0
  Rate = 0.003 +/- 0.001

[Fri Jun  7 02:36:44 2013] Off-axis axis estimate = 14.05'
[Fri Jun  7 02:38:40 2013] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 02:38:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 02:38:40 2013] Initial guess for spatial extent in simple fitting = 13.45"
[Fri Jun  7 02:38:40 2013] source mask rpix=3.1, npix_max = 51, mask sum = 32, frac = 0.620
[Fri Jun  7 02:38:40 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 13.45"
[Fri Jun  7 03:11:04 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun  7 03:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src13.csv
[Fri Jun  7 03:11:04 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun  7 03:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src13.csv
[Fri Jun  7 03:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:11:05 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun  7 03:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Jun  7 03:11:05 2013] fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun  7 03:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Jun  7 03:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 03:45:06 2013] Spatial fit model total counts = 64.893900, observed total counts = 56.000000
[Fri Jun  7 03:45:06 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 03:45:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:45:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:45:06 2013] Assessing source extent using major
[Fri Jun  7 03:45:06 2013] Source does appear to be extended
[Fri Jun  7 03:45:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 03:45:06 2013] Deleting source due to low Poisson probability 0.9