[Fri Jun  7 02:37:14 2013] Detection parameters:
  Position = (316.2, 414.1) = 4 34 48.06 -77 51 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.8 +/- 6.9
  Background counts = 1.5
  Rate = 0.004 +/- 0.0009

[Fri Jun  7 02:37:14 2013] Off-axis axis estimate = 8.48'
[Fri Jun  7 03:11:05 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 03:11:05 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Fri Jun  7 03:11:05 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Fri Jun  7 03:11:05 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.67"
[Fri Jun  7 03:28:14 2013] fullrun_mos1_xmm0103861701_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun  7 03:28:14 2013] fullrun_mos1_xmm0103861701_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun  7 03:28:14 2013] Fit fullrun_mos1_xmm0103861701_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jun  7 03:28:14 2013] fullrun_mos1_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun  7 03:28:14 2013] fullrun_mos1_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun  7 03:28:14 2013] Fit fullrun_mos1_xmm0103861701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun  7 03:45:09 2013] Spatial fit model total counts = 46.837500, observed total counts = 42.000000
[Fri Jun  7 03:45:09 2013] Offset between fit and detection position for source 3 = 0.699037 pixels
[Fri Jun  7 03:45:09 2013] 45.749000 total counts/ 25.362700 bgd. counts: snr = 4.048002
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.699037 pixels
  Position = (315.5, 414.0) = 4 34 49.03 -77 51 51.4
  Extent = 8.0 (4.9-13.8)" x 2.9 (2.7-5.1)", rotation angle = 357 (336-15) degrees
  Source counts = 20.4 +/- 6.8
  Background counts = 25.4
  Rate = 0.003 +/- 0.0008
[Fri Jun  7 03:45:09 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 03:45:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 03:45:09 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 03:45:09 2013] Source does appear to be extended
[Fri Jun  7 03:45:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Fri Jun  7 04:07:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 04:07:36 2013] Initial guess for spatial extent in simple fitting = 5.45"
[Fri Jun  7 04:07:36 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.976
[Fri Jun  7 04:07:36 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 5.45"
[Fri Jun  7 04:23:57 2013] fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun  7 04:23:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_src6.csv
[Fri Jun  7 04:23:57 2013] fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun  7 04:23:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_src6.csv
[Fri Jun  7 04:23:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 04:23:57 2013] fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun  7 04:23:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun  7 04:23:57 2013] fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun  7 04:23:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun  7 04:23:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 04:40:17 2013] Spatial fit model total counts = 48.335100, observed total counts = 41.000000
[Fri Jun  7 04:40:17 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 04:40:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 04:40:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 04:40:17 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 04:40:17 2013] Source does appear to be extended
[Fri Jun  7 04:40:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Fri Jun  7 04:59:34 2013] XMMSAS src. selection expression = ellipse(27397.685000, 35971.388800, 479.094614, 175.271405, 356.771063, X, Y)
[Fri Jun  7 04:59:34 2013] Writing source region out to fullrun_mos1_xmm0103861701_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun  7 04:59:34 2013] Extracting stamp from image fullrun_mos1_xmm0103861701_pi300-10000_cl_sm2.00.img.gz, (288, 386) - (343, 442)
[Fri Jun  7 04:59:34 2013] XMMSAS bgd. selection expression = annulus(27397.685000, 35971.388800, 798.491023, 1596.982046, X, Y) && !ellipse(27363.518160, 34039.556480, 612.373618, 308.173609, 18.556153, X, Y)
[Fri Jun  7 04:59:34 2013] Writing fullrun_mos1_xmm0103861701_pi300-10000_pass1_cl_src3.gif
[Fri Jun  7 05:00:59 2013] Mean detx,y = (-9679.39, -7272.83) 
[Fri Jun  7 05:01:01 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 05:01:18 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 05:01:18 2013] Setting source spectrum file to fullrun_mos1_xmm0103861701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun  7 05:01:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0103861701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun  7 05:05:56 2013] Not generating rmf since there are only 20 counts
[Fri Jun  7 05:05:56 2013] rmf not generated due to insufficient counts
[Fri Jun  7 05:15:24 2013] Updating aperture counts using extracted products
[Fri Jun  7 05:15:24 2013] Total counts from fullrun_mos1_xmm0103861701_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 23.00
[Fri Jun  7 05:15:24 2013] Total counts from fullrun_mos1_xmm0103861701_pi300-10000_pass1_cl_src3_bgd.pi.gz = 51.00
[Fri Jun  7 05:15:24 2013] Got source and background scale factors 264920.000000, 5606694.000000
[Fri Jun  7 05:15:24 2013] User source parameters:
  Position = (315.5, 414.0) = 4 34 49.03 -77 51 51.4
  Extent = 8.0 (4.9-13.8)" x 2.9 (2.7-5.1)", rotation angle = 357 (336-15) degrees
  Source aperture counts = 20.6 +/- 5.9
  Background aperture counts = 2.4
  Rate = 0.003 +/- 0.0007

[Fri Jun  7 05:15:25 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 05:15:25 2013] Using photon index=1.80, rate=0.00255, arf fullrun_mos1_xmm0103861701_pi300-10000_pass1_cl_src3.arf
[Fri Jun  7 05:15:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 05:15:25 2013] Updating source flux to 8e-14
[Fri Jun  7 05:15:30 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Fri Jun  7 05:15:30 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  7 05:15:34 2013] xmm0103861701/analysis//spectral/fullrun_mos1_xmm0103861701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete