[Mon Jun 11 10:03:19 2012] Detection parameters:
  Position = (395.2, 355.0) = 1 4 10.22 -58 22 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.5 +/- 7.4
  Background counts = 3.3
  Rate = 0.007 +/- 0.002

[Mon Jun 11 10:03:19 2012] Off-axis axis estimate = 8.13'
[Mon Jun 11 10:04:07 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:04:07 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Mon Jun 11 10:04:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062
[Mon Jun 11 10:04:07 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.49"
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jun 11 10:26:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src7.csv
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jun 11 10:26:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src7.csv
[Mon Jun 11 10:26:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jun 11 10:26:06 2012] Fit fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jun 11 10:42:27 2012] Spatial fit model total counts = 91.944200, observed total counts = 97.000000
[Mon Jun 11 10:42:27 2012] Offset between fit and detection position for source 7 = 3.476560 pixels
[Mon Jun 11 10:42:27 2012] 80.695500 total counts/ 20.991700 bgd. counts: snr = 13.031013
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.476560 pixels
  Position = (397.9, 357.2) = 1 4 8.72 -58 22 16.3
  Extent = 14.5 (11.7-21.0)", rotation angle = 0
  Source counts = 59.7 +/- 9.0
  Background counts = 21.0
  Rate = 0.01 +/- 0.002
[Mon Jun 11 10:42:27 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 10:42:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 10:42:27 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 10:42:27 2012] Source does appear to be extended
[Mon Jun 11 10:42:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 10:42:27 2012] Source is confused with source 8
[Mon Jun 11 10:42:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:42:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 10:42:33 2012] Initial guess for spatial extent in simple fitting = 14.55"
[Mon Jun 11 10:42:33 2012] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.083
[Mon Jun 11 10:42:33 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 14.55"
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 11 11:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src7.csv
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 11 11:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src7.csv
[Mon Jun 11 11:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 11 11:03:55 2012] Fit fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jun 11 11:09:04 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Mon Jun 11 11:09:04 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 11:09:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 11:09:04 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 11:09:04 2012] Source does appear to be extended
[Mon Jun 11 11:09:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:09:08 2012] XMMSAS src. selection expression = ellipse(34568.666000, 31027.047600, 872.742025, 872.742025, 0.000000, X, Y)
[Mon Jun 11 11:09:08 2012] Writing source region out to fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun 11 11:09:08 2012] Extracting stamp from image fullrun_pn_xmm0103861601_pi300-10000_cl_sm2.00.img.gz, (348, 307) - (448, 407)
[Mon Jun 11 11:09:08 2012] XMMSAS bgd. selection expression = annulus(34568.666000, 31027.047600, 1454.570042, 2909.140084, X, Y) && !ellipse(34251.630000, 30842.627400, 1632.256047, 1632.256047, 0.000000, X, Y) && !ellipse(33112.796000, 30433.496000, 1448.512042, 1448.512042, 0.000000, X, Y)
[Mon Jun 11 11:09:08 2012] Writing fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src7.gif
[Mon Jun 11 11:11:19 2012] Mean detx,y = (64.53, 11382.12) 
[Mon Jun 11 11:11:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 11:11:39 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 11:11:39 2012] Setting source spectrum file to fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 11 11:11:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jun 11 11:21:18 2012] Not generating rmf since there are only 59 counts
[Mon Jun 11 11:21:18 2012] rmf not generated due to insufficient counts
[Mon Jun 11 11:31:24 2012] Updating aperture counts using extracted products
[Mon Jun 11 11:31:24 2012] Error reading totcts from fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 11 11:31:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:31:24 2012] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src7.arf
[Mon Jun 11 11:31:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:31:24 2012] Updating source flux to 6.3e-14
[Mon Jun 11 11:31:46 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Mon Jun 11 11:31:46 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting