[Mon Jun 11 10:03:19 2012] Detection parameters:
  Position = (339.7, 226.2) = 1 4 40.79 -58 31 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.4 +/- 6.9
  Background counts = 3.5
  Rate = 0.01 +/- 0.003

[Mon Jun 11 10:03:19 2012] Off-axis axis estimate = 6.03'
[Mon Jun 11 10:04:07 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:04:07 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Mon Jun 11 10:04:07 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.876
[Mon Jun 11 10:04:07 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.44"
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src16.ximg exists
[Mon Jun 11 10:26:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src16.csv
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Jun 11 10:26:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src16.csv
[Mon Jun 11 10:26:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Jun 11 10:26:06 2012] Fit fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Jun 11 10:42:27 2012] Spatial fit model total counts = 84.648700, observed total counts = 81.000000
[Mon Jun 11 10:42:27 2012] Offset between fit and detection position for source 16 = 0.954391 pixels
[Mon Jun 11 10:42:27 2012] 52.586900 total counts/ 30.671000 bgd. counts: snr = 3.957267
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.954391 pixels
  Position = (338.8, 226.0) = 1 4 41.31 -58 31 47.6
  Extent = 6.7 (3.0-9.3)", rotation angle = 0
  Source counts = 21.9 +/- 7.3
  Background counts = 30.7
  Rate = 0.005 +/- 0.002
[Mon Jun 11 10:42:27 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 10:42:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 10:42:27 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 10:42:27 2012] Source does appear to be extended
[Mon Jun 11 10:42:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 10:42:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:42:33 2012] Initial guess for spatial extent in simple fitting = 6.69"
[Mon Jun 11 10:42:33 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.964
[Mon Jun 11 10:42:33 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.69"
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src15.ximg exists
[Mon Jun 11 11:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src15.csv
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Jun 11 11:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src15.csv
[Mon Jun 11 11:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jun 11 11:03:55 2012] Fit fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Jun 11 11:09:04 2012] Spatial fit model total counts = 83.195300, observed total counts = 76.000000
[Mon Jun 11 11:09:04 2012] Offset between fit and detection position for source 16 = 0.993255 pixels
[Mon Jun 11 11:09:04 2012] 87.906200 total counts/ 76.501300 bgd. counts: snr = 1.303938
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.993255 pixels
  Position = (339.7, 226.2) = 1 4 40.77 -58 31 46.8
  Extent = 3.3 (1.7-6.5)", rotation angle = 0
  Source counts = 11.4 +/- 9.4
  Background counts = 76.5
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability