[Mon Jun 11 10:03:19 2012] Detection parameters:
  Position = (275.2, 302.1) = 1 5 16.61 -58 26 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10125.7 +/- 119.6
  Background counts = 5.2
  Rate = 3 +/- 0.03

[Mon Jun 11 10:03:19 2012] Off-axis axis estimate = 1.71'
[Mon Jun 11 10:04:07 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:04:07 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Jun 11 10:04:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Jun 11 10:04:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 10:26:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 10:26:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 10:26:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 10:26:06 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 10:26:06 2012] Fit fullrun_pn_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 11 10:42:27 2012] Spatial fit model total counts = 9045.940000, observed total counts = 8957.000000
[Mon Jun 11 10:42:27 2012] Offset between fit and detection position for source 1 = 0.081973 pixels
[Mon Jun 11 10:42:27 2012] 9035.020000 total counts/ 1784.020000 bgd. counts: snr = 171.671438
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.081973 pixels
  Position = (275.2, 302.1) = 1 5 16.61 -58 26 16.4
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 7251.0 +/- 95.1
  Background counts = 1784.0
  Rate = 2 +/- 0.02
[Mon Jun 11 10:42:27 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 10:42:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 10:42:27 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 10:42:27 2012] Source does appear to be extended
[Mon Jun 11 10:42:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 10:42:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:42:33 2012] Initial guess for spatial extent in simple fitting = 5.86"
[Mon Jun 11 10:42:33 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.171
[Mon Jun 11 10:42:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.86"
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 11 11:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 11 11:03:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 11:03:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 11 11:03:55 2012] fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 11 11:03:55 2012] Fit fullrun_pn_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 11 11:09:04 2012] Spatial fit model total counts = 9044.590000, observed total counts = 8957.000000
[Mon Jun 11 11:09:04 2012] Offset between fit and detection position for source 1 = 0.000174 pixels
[Mon Jun 11 11:09:04 2012] 9033.750000 total counts/ 1781.210000 bgd. counts: snr = 171.843287
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000174 pixels
  Position = (275.2, 302.1) = 1 5 16.61 -58 26 16.4
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 7252.5 +/- 95.0
  Background counts = 1781.2
  Rate = 2 +/- 0.02
[Mon Jun 11 11:09:04 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 11:09:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 11:09:04 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 11:09:04 2012] Source does appear to be extended
[Mon Jun 11 11:09:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:09:08 2012] Counts = 7252.540000, rescaling region sizes by 2.000000
[Mon Jun 11 11:09:08 2012] XMMSAS src. selection expression = ellipse(23892.107980, 26238.323400, 704.431220, 704.431220, 0.000000, X, Y)
[Mon Jun 11 11:09:08 2012] Writing source region out to fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 11 11:09:08 2012] Extracting stamp from image fullrun_pn_xmm0103861601_pi300-10000_cl_sm2.00.img.gz, (235, 262) - (316, 343)
[Mon Jun 11 11:09:08 2012] XMMSAS bgd. selection expression = annulus(23892.107980, 26238.323400, 2348.104068, 4696.208135, X, Y) && !ellipse(28968.907257, 30971.043610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28841.513767, 28445.741192, 2607.152075, 448.359975, 338.783867, X, Y) && !ellipse(27821.019600, 28033.156200, 2420.704070, 551.438416, 332.736000, X, Y) && !ellipse(21440.852918, 25466.781800, 354.885610, 354.885610, 0.000000, X, Y)
[Mon Jun 11 11:09:08 2012] Writing fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1.gif
[Mon Jun 11 11:09:12 2012] Mean detx,y = (56.24, -244.04) 
[Mon Jun 11 11:09:13 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 11:09:56 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 11:09:57 2012] Setting source spectrum file to fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 11 11:09:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 11 11:31:24 2012] Updating aperture counts using extracted products
[Mon Jun 11 11:31:24 2012] Error reading totcts from fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 11 11:31:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:31:24 2012] Using photon index=1.80, rate=1.62, arf fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1.arf
[Mon Jun 11 11:31:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:31:24 2012] Updating source flux to 4e-12
[Mon Jun 11 11:31:52 2012] Reading fit data from xmm0103861601/analysis//spectral/fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun 11 11:31:52 2012] Spectral fit parameter nH value = 1.87504e+12
[Mon Jun 11 11:31:52 2012] Spectral fit parameter PhoIndex value = 2.26905
[Mon Jun 11 11:31:52 2012] Failed to get F(0.3-8.0) from xmm0103861601/analysis//spectral/fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun 11 11:31:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:31:52 2012] Using Nh = 1.9e+12, photon index=2.27, rate=1.62, arf fullrun_pn_xmm0103861601_pi300-10000_pass1_cl_src1.arf
[Mon Jun 11 11:31:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:31:52 2012] Updating source flux to 3.1e-12