[Mon Jun 11 10:03:31 2012] Detection parameters: Position = (247.2, 490.4) = 1 5 31.91 -58 12 36.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 24.6 +/- 6.2 Background counts = 1.2 Rate = 0.003 +/- 0.0009 [Mon Jun 11 10:03:31 2012] Off-axis axis estimate = 14.40' [Mon Jun 11 10:26:07 2012] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting [Mon Jun 11 10:26:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jun 11 10:26:07 2012] Initial guess for spatial extent in simple fitting = 13.63" [Mon Jun 11 10:26:07 2012] source mask rpix=3.1, npix_max = 52, mask sum = 48, frac = 0.909 [Mon Jun 11 10:26:07 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 13.63" [Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src8.ximg exists [Mon Jun 11 10:37:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src8.csv [Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src8_1.ximg exists [Mon Jun 11 10:37:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src8.csv [Mon Jun 11 10:37:20 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Mon Jun 11 10:37:20 2012] Fit fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Mon Jun 11 10:42:28 2012] Spatial fit model total counts = 36.232300, observed total counts = 35.000000 [Mon Jun 11 10:42:28 2012] Offset between fit and detection position for source 2 = 0.298594 pixels [Mon Jun 11 10:42:28 2012] 36.551600 total counts/ 21.541600 bgd. counts: snr = 3.234013 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.298594 pixels Position = (246.9, 490.4) = 1 5 32.07 -58 12 37.6 Extent = 4.2 (3.4-5.8)", rotation angle = 0 Source counts = 15.0 +/- 6.0 Background counts = 21.5 Rate = 0.002 +/- 0.0008 [Mon Jun 11 10:42:28 2012] Vigneting correction estimate = 1.000000 [Mon Jun 11 10:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 11 10:42:28 2012] Assessing source extent using major axis lower bound [Mon Jun 11 10:42:28 2012] Source does appear to be extended [Mon Jun 11 10:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 11 10:42:28 2012] Deleting source due to low Poisson probability 0.9