[Mon Jun 11 10:03:31 2012] Detection parameters:
  Position = (237.0, 197.8) = 1 5 37.85 -58 33 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17.2 +/- 5.1
  Background counts = 2.0
  Rate = 0.002 +/- 0.0007

[Mon Jun 11 10:03:31 2012] Off-axis axis estimate = 8.55'
[Mon Jun 11 10:26:07 2012] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:26:07 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Mon Jun 11 10:26:07 2012] source mask rpix=2.5, npix_max = 35, mask sum = 26, frac = 0.742
[Mon Jun 11 10:26:07 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.70"
[Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jun 11 10:37:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src12.csv
[Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jun 11 10:37:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src12.csv
[Mon Jun 11 10:37:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jun 11 10:37:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jun 11 10:37:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jun 11 10:37:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:42:28 2012] Spatial fit model total counts = 35.010800, observed total counts = 29.000000
[Mon Jun 11 10:42:28 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 11 10:42:28 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 10:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 10:42:28 2012] Assessing source extent using major
[Mon Jun 11 10:42:28 2012] Source does appear to be extended
[Mon Jun 11 10:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 10:42:28 2012] Deleting source due to low Poisson probability 0.9