[Mon Jun 11 10:03:31 2012] Detection parameters:
  Position = (275.2, 302.1) = 1 5 16.60 -58 26 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4898.7 +/- 83.7
  Background counts = 1.7
  Rate = 0.7 +/- 0.01

[Mon Jun 11 10:03:31 2012] Off-axis axis estimate = 1.71'
[Mon Jun 11 10:26:06 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:26:07 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Jun 11 10:26:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Jun 11 10:26:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 10:37:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 10:37:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 10:37:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 10:37:20 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 10:37:20 2012] Fit fullrun_mos1_xmm0103861601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 11 10:42:28 2012] Spatial fit model total counts = 4298.490000, observed total counts = 4252.000000
[Mon Jun 11 10:42:28 2012] Offset between fit and detection position for source 1 = 0.096570 pixels
[Mon Jun 11 10:42:28 2012] 4295.245000 total counts/ 935.625000 bgd. counts: snr = 109.834619
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.096570 pixels
  Position = (275.1, 302.2) = 1 5 16.62 -58 26 16.2
  Extent = 5.4 (5.2-5.5)", rotation angle = 0
  Source counts = 3359.6 +/- 65.5
  Background counts = 935.6
  Rate = 0.5 +/- 0.009
[Mon Jun 11 10:42:28 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 10:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 10:42:28 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 10:42:28 2012] Source does appear to be extended
[Mon Jun 11 10:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:03:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:03:55 2012] Initial guess for spatial extent in simple fitting = 5.36"
[Mon Jun 11 11:03:55 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.333
[Mon Jun 11 11:03:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.36"
[Mon Jun 11 11:07:04 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 11 11:07:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 11:07:04 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 11 11:07:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 11:07:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:07:04 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 11 11:07:04 2012] fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 11 11:07:04 2012] Fit fullrun_mos1_xmm0103861601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 11 11:09:04 2012] Spatial fit model total counts = 4292.310000, observed total counts = 4252.000000
[Mon Jun 11 11:09:04 2012] Offset between fit and detection position for source 1 = 0.003731 pixels
[Mon Jun 11 11:09:04 2012] 4289.240000 total counts/ 932.340000 bgd. counts: snr = 109.938864
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003731 pixels
  Position = (275.1, 302.2) = 1 5 16.62 -58 26 16.2
  Extent = 5.4 (5.2-5.5)", rotation angle = 0
  Source counts = 3356.9 +/- 65.5
  Background counts = 932.3
  Rate = 0.5 +/- 0.009
[Mon Jun 11 11:09:04 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 11:09:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 11:09:04 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 11:09:04 2012] Source does appear to be extended
[Mon Jun 11 11:09:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:22:31 2012] Counts = 3356.900000, rescaling region sizes by 2.000000
[Mon Jun 11 11:22:31 2012] XMMSAS src. selection expression = ellipse(23889.448500, 26242.351800, 644.876419, 644.876419, 0.000000, X, Y)
[Mon Jun 11 11:22:31 2012] Writing source region out to fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 11 11:22:31 2012] Extracting stamp from image fullrun_mos1_xmm0103861601_pi300-10000_cl_sm2.00.img.gz, (238, 265) - (312, 339)
[Mon Jun 11 11:22:31 2012] XMMSAS bgd. selection expression = annulus(23889.448500, 26242.351800, 2149.588062, 4299.176124, X, Y)
[Mon Jun 11 11:22:31 2012] Writing fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1.gif
[Mon Jun 11 11:22:32 2012] Mean detx,y = (320.17, -255.61) 
[Mon Jun 11 11:22:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 11:22:47 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 11:22:47 2012] Setting source spectrum file to fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 11 11:22:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 11 11:31:24 2012] Updating aperture counts using extracted products
[Mon Jun 11 11:31:24 2012] Error reading totcts from fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 11 11:31:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:31:24 2012] Using photon index=1.80, rate=0.472, arf fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1.arf
[Mon Jun 11 11:31:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:31:24 2012] Updating source flux to 4.7e-12
[Mon Jun 11 11:31:36 2012] Reading fit data from xmm0103861601/analysis//spectral/fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun 11 11:31:36 2012] Spectral fit parameter nH value = 9.35244e+14
[Mon Jun 11 11:31:36 2012] Spectral fit parameter PhoIndex value = 2.16479
[Mon Jun 11 11:31:36 2012] Failed to get F(0.3-8.0) from xmm0103861601/analysis//spectral/fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun 11 11:31:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:31:36 2012] Using Nh = 9.4e+14, photon index=2.16, rate=0.472, arf fullrun_mos1_xmm0103861601_pi300-10000_pass1_cl_src1.arf
[Mon Jun 11 11:31:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:31:36 2012] Updating source flux to 4.1e-12