[Tue Apr 10 13:40:53 2012] Detection parameters:
  Position = (382.3, 291.8) = 22 36 29.76 34 25 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.2 +/- 8.4
  Background counts = 8.0
  Rate = 0.01 +/- 0.003

[Tue Apr 10 13:40:53 2012] Off-axis axis estimate = 6.10'
[Tue Apr 10 13:41:03 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:41:03 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Tue Apr 10 13:41:03 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.871
[Tue Apr 10 13:41:03 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.48"
[Tue Apr 10 13:41:05 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src4.ximg exists
[Tue Apr 10 13:41:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src4.csv
[Tue Apr 10 13:41:05 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Apr 10 13:41:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src4.csv
[Tue Apr 10 13:41:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:41:05 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Apr 10 13:41:05 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Apr 10 13:41:05 2012] Fit fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Apr 10 13:41:07 2012] Spatial fit model total counts = 67.998700, observed total counts = 68.000000
[Tue Apr 10 13:41:07 2012] Offset between fit and detection position for source 4 = 0.379042 pixels
[Tue Apr 10 13:41:07 2012] 66.045600 total counts/ 45.194300 bgd. counts: snr = 3.101639
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.379042 pixels
  Position = (382.5, 292.1) = 22 36 29.70 34 25 58.3
  Extent = 5.2 (3.9-7.7)", rotation angle = 0
  Source counts = 20.9 +/- 8.1
  Background counts = 45.2
  Rate = 0.004 +/- 0.002
[Tue Apr 10 13:41:07 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:41:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:41:07 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:41:07 2012] Source does appear to be extended
[Tue Apr 10 13:41:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:41:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:41:12 2012] Initial guess for spatial extent in simple fitting = 5.17"
[Tue Apr 10 13:41:12 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.054
[Tue Apr 10 13:41:12 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.17"
[Tue Apr 10 13:41:13 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src4.ximg exists
[Tue Apr 10 13:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src4.csv
[Tue Apr 10 13:41:13 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Apr 10 13:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src4.csv
[Tue Apr 10 13:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:41:13 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Apr 10 13:41:13 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Apr 10 13:41:13 2012] Fit fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Apr 10 13:41:16 2012] Warning, spatial fit 4 centroid is now closest to src. 5
[Tue Apr 10 13:41:16 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:41:16 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:41:16 2012] Source does appear to be extended
[Tue Apr 10 13:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:41:21 2012] XMMSAS src. selection expression = ellipse(33224.987600, 25365.192800, 309.925809, 309.925809, 0.000000, X, Y)
[Tue Apr 10 13:41:21 2012] Not overwriting source region fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_src.reg
[Tue Apr 10 13:41:21 2012] Extracting stamp from image fullrun_mos1_xmm0103861301_pi300-10000_cl_sm2.00.img.gz, (365, 274) - (400, 310)
[Tue Apr 10 13:41:21 2012] XMMSAS bgd. selection expression = annulus(33224.987600, 25365.192800, 516.543015, 1033.086030, X, Y)
[Tue Apr 10 13:41:21 2012] Writing fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4.gif
[Tue Apr 10 13:41:21 2012] ../../xmm0103861301/products/events/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0103861301/products/events/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Apr 10 13:41:21 2012] Mean detx,y = (-2927.67, -8534.96) 
[Tue Apr 10 13:41:21 2012] ../../xmm0103861301/products/images/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_src.img and ../../xmm0103861301/products/images/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Apr 10 13:41:21 2012] ../../xmm0103861301/products/spectra/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0103861301/products/spectra/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Apr 10 13:41:21 2012] Setting source spectrum file to fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Apr 10 13:41:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Apr 10 13:41:21 2012] ../../xmm0103861301/products/lightcurves/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0103861301/products/lightcurves/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Apr 10 13:41:22 2012] Not generating rmf since there are only 20 counts
[Tue Apr 10 13:41:22 2012] rmf not generated due to insufficient counts
[Tue Apr 10 13:41:22 2012] fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Tue Apr 10 13:41:28 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:41:28 2012] Error reading totcts from fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Apr 10 13:41:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:41:28 2012] Using photon index=1.80, rate=0.00422, arf fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src4.arf
[Tue Apr 10 13:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:41:28 2012] Updating source flux to 8.3e-14
[Tue Apr 10 13:41:31 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting