[Tue Apr 10 13:40:53 2012] Detection parameters:
  Position = (285.2, 277.0) = 22 37 3.87 34 24 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.1 +/- 15.7
  Background counts = 10.0
  Rate = 0.03 +/- 0.003

[Tue Apr 10 13:40:53 2012] Off-axis axis estimate = 1.83'
[Tue Apr 10 13:41:03 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:41:03 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Tue Apr 10 13:41:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Tue Apr 10 13:41:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Tue Apr 10 13:41:04 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 13:41:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 13:41:05 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 13:41:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 13:41:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:41:05 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 13:41:05 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 13:41:05 2012] Fit fullrun_mos1_xmm0103861301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 13:41:07 2012] Spatial fit model total counts = 286.986000, observed total counts = 287.000000
[Tue Apr 10 13:41:07 2012] Offset between fit and detection position for source 1 = 0.502807 pixels
[Tue Apr 10 13:41:07 2012] 287.920000 total counts/ 169.445000 bgd. counts: snr = 9.101487
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.502807 pixels
  Position = (284.7, 276.9) = 22 37 4.05 34 24 52.4
  Extent = 11.2 (7.4-14.7)", rotation angle = 0
  Source counts = 118.5 +/- 17.0
  Background counts = 169.4
  Rate = 0.02 +/- 0.003
[Tue Apr 10 13:41:07 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:41:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:41:07 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:41:07 2012] Source does appear to be extended
[Tue Apr 10 13:41:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:41:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:41:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 13:41:12 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Tue Apr 10 13:41:12 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Tue Apr 10 13:41:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.22"
[Tue Apr 10 13:41:12 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 13:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 13:41:13 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 13:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 13:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:41:13 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 13:41:13 2012] fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 13:41:13 2012] Fit fullrun_mos1_xmm0103861301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 13:41:16 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Tue Apr 10 13:41:16 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:41:16 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:41:16 2012] Source does appear to be extended
[Tue Apr 10 13:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:41:21 2012] XMMSAS src. selection expression = ellipse(24724.617200, 24044.182000, 673.182019, 673.182019, 0.000000, X, Y)
[Tue Apr 10 13:41:21 2012] Not overwriting source region fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 13:41:21 2012] Extracting stamp from image fullrun_mos1_xmm0103861301_pi300-10000_cl_sm2.00.img.gz, (246, 238) - (323, 316)
[Tue Apr 10 13:41:21 2012] XMMSAS bgd. selection expression = annulus(24724.617200, 24044.182000, 1121.970032, 2243.940065, X, Y) && !ellipse(24452.059906, 24818.820343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24116.391800, 25764.405400, 374.992011, 209.115206, 314.307000, X, Y)
[Tue Apr 10 13:41:21 2012] Writing fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 13:41:21 2012] ../../xmm0103861301/products/events/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0103861301/products/events/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 13:41:21 2012] Mean detx,y = (696.15, -730.11) 
[Tue Apr 10 13:41:21 2012] ../../xmm0103861301/products/images/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_src.img and ../../xmm0103861301/products/images/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 13:41:21 2012] ../../xmm0103861301/products/spectra/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0103861301/products/spectra/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 13:41:21 2012] Setting source spectrum file to fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 13:41:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 13:41:21 2012] ../../xmm0103861301/products/lightcurves/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0103861301/products/lightcurves/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 13:41:22 2012] fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 13:41:22 2012] fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 13:41:28 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:41:28 2012] Error reading totcts from fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 13:41:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:41:28 2012] Using photon index=1.80, rate=0.024, arf fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 13:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:41:28 2012] Updating source flux to 2.4e-13
[Tue Apr 10 13:41:32 2012] Reading fit data from xmm0103861301/analysis//spectral/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 13:41:32 2012] Spectral fit parameter nH value = 8.86848e+20
[Tue Apr 10 13:41:32 2012] Spectral fit parameter PhoIndex value = 2.56719
[Tue Apr 10 13:41:32 2012] Failed to get F(0.3-8.0) from xmm0103861301/analysis//spectral/fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 13:41:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:41:32 2012] Using Nh = 8.9e+20, photon index=2.57, rate=0.024, arf fullrun_mos1_xmm0103861301_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 13:41:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:41:32 2012] Updating source flux to 1.9e-13