[Sat Jun 23 09:50:58 2012] Detection parameters:
  Position = (189.0, 182.6) = 22 19 45.60 12 0 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.6 +/- 10.6
  Background counts = 17.3
  Rate = 0.006 +/- 0.001

[Sat Jun 23 09:50:58 2012] Off-axis axis estimate = 11.55'
[Sat Jun 23 09:52:16 2012] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 09:52:16 2012] Initial guess for spatial extent in simple fitting = 12.21"
[Sat Jun 23 09:52:16 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.961
[Sat Jun 23 09:52:16 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.21"
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 23 11:05:19 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src6.csv
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 23 11:05:19 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src6.csv
[Sat Jun 23 11:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:05:20 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 23 11:05:20 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 23 11:05:20 2012] Fit fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jun 23 11:26:35 2012] Spatial fit model total counts = 165.724000, observed total counts = 155.000000
[Sat Jun 23 11:26:35 2012] Offset between fit and detection position for source 6 = 0.498059 pixels
[Sat Jun 23 11:26:35 2012] 166.546100 total counts/ 126.779000 bgd. counts: snr = 3.531834
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.498059 pixels
  Position = (189.5, 182.5) = 22 19 45.46 12 0 27.8
  Extent = 6.1 (3.7-8.7)", rotation angle = 0
  Source counts = 39.8 +/- 12.9
  Background counts = 126.8
  Rate = 0.005 +/- 0.002
[Sat Jun 23 11:26:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:26:35 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 11:26:35 2012] Source does appear to be extended
[Sat Jun 23 11:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 11:26:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:26:49 2012] Initial guess for spatial extent in simple fitting = 6.07"
[Sat Jun 23 11:26:49 2012] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.626
[Sat Jun 23 11:26:49 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.07"
[Sat Jun 23 12:24:58 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 23 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src6.csv
[Sat Jun 23 12:24:58 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 23 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src6.csv
[Sat Jun 23 12:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:24:59 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 23 12:24:59 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 23 12:24:59 2012] Fit fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jun 23 12:31:33 2012] Spatial fit model total counts = 150.735000, observed total counts = 141.000000
[Sat Jun 23 12:31:33 2012] Offset between fit and detection position for source 6 = 0.037702 pixels
[Sat Jun 23 12:31:33 2012] 151.354100 total counts/ 111.483000 bgd. counts: snr = 3.776190
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.037702 pixels
  Position = (189.5, 182.5) = 22 19 45.45 12 0 27.8
  Extent = 6.1 (3.6-8.8)", rotation angle = 0
  Source counts = 39.9 +/- 12.3
  Background counts = 111.5
  Rate = 0.005 +/- 0.001
[Sat Jun 23 12:31:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:31:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:31:33 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 12:31:33 2012] Source does appear to be extended
[Sat Jun 23 12:31:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:31:42 2012] XMMSAS src. selection expression = ellipse(16438.853600, 15831.475200, 366.058211, 366.058211, 0.000000, X, Y)
[Sat Jun 23 12:31:42 2012] Writing source region out to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 23 12:31:42 2012] Extracting stamp from image fullrun_pn_xmm0103861201_pi300-10000_cl_sm2.00.img.gz, (168, 161) - (211, 204)
[Sat Jun 23 12:31:42 2012] XMMSAS bgd. selection expression = annulus(16438.853600, 15831.475200, 610.097018, 1220.194035, X, Y) && !ellipse(14681.421281, 16925.082652, 541.287293, 437.017456, 0.000000, X, Y) && !ellipse(13687.584000, 17980.184000, 1984.704057, 1984.704057, 0.000000, X, Y)
[Sat Jun 23 12:31:42 2012] Writing fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src6.gif
[Sat Jun 23 12:38:20 2012] Mean detx,y = (3761.03, -11482.89) 
[Sat Jun 23 12:38:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 12:38:39 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 12:38:40 2012] Setting source spectrum file to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 23 12:38:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 23 13:25:45 2012] Not generating rmf since there are only 39 counts
[Sat Jun 23 13:25:45 2012] rmf not generated due to insufficient counts
[Sat Jun 23 13:56:32 2012] Updating aperture counts using extracted products
[Sat Jun 23 13:56:32 2012] Error reading totcts from fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 23 13:56:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 13:56:33 2012] Using photon index=1.80, rate=0.00472, arf fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src6.arf
[Sat Jun 23 13:56:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 13:56:33 2012] Updating source flux to 2.9e-14
[Sat Jun 23 13:56:53 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting