[Sat Jun 23 09:50:58 2012] Detection parameters:
  Position = (280.4, 284.9) = 22 19 18.51 12 7 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21632.9 +/- 175.7
  Background counts = 21.9
  Rate = 3 +/- 0.02

[Sat Jun 23 09:50:58 2012] Off-axis axis estimate = 1.64'
[Sat Jun 23 09:52:16 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 09:52:16 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Jun 23 09:52:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.066
[Sat Jun 23 09:52:16 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.25"
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 23 11:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 23 11:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 11:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 23 11:05:20 2012] Fit fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 23 11:26:35 2012] Spatial fit model total counts = 16662.900000, observed total counts = 16542.000000
[Sat Jun 23 11:26:35 2012] Offset between fit and detection position for source 5 = 0.081432 pixels
[Sat Jun 23 11:26:35 2012] 16697.760000 total counts/ 3413.560000 bgd. counts: snr = 227.369201
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.081432 pixels
  Position = (280.3, 284.9) = 22 19 18.52 12 7 53.0
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 13284.2 +/- 129.2
  Background counts = 3413.6
  Rate = 2 +/- 0.02
[Sat Jun 23 11:26:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:26:35 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 11:26:35 2012] Source does appear to be extended
[Sat Jun 23 11:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 11:26:35 2012] Source is confused with source 23
[Sat Jun 23 11:26:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:26:49 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Sat Jun 23 11:26:49 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.186
[Sat Jun 23 11:26:49 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.81"
[Sat Jun 23 12:24:58 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 23 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src5.csv
[Sat Jun 23 12:24:58 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 23 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src5.csv
[Sat Jun 23 12:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:24:59 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 23 12:24:59 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 23 12:24:59 2012] Fit fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 23 12:31:33 2012] Spatial fit model total counts = 16673.600000, observed total counts = 16542.000000
[Sat Jun 23 12:31:33 2012] Offset between fit and detection position for source 5 = 0.000185 pixels
[Sat Jun 23 12:31:33 2012] 16708.790000 total counts/ 3412.390000 bgd. counts: snr = 227.617024
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000185 pixels
  Position = (280.3, 284.9) = 22 19 18.52 12 7 53.0
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 13296.4 +/- 129.3
  Background counts = 3412.4
  Rate = 2 +/- 0.02
[Sat Jun 23 12:31:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:31:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:31:33 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 12:31:33 2012] Source does appear to be extended
[Sat Jun 23 12:31:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:31:42 2012] Counts = 13296.400000, rescaling region sizes by 3.000000
[Sat Jun 23 12:31:42 2012] XMMSAS src. selection expression = ellipse(24339.165800, 24734.168840, 1044.604830, 1044.604830, 0.000000, X, Y)
[Sat Jun 23 12:31:42 2012] Writing source region out to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 23 12:31:42 2012] Extracting stamp from image fullrun_pn_xmm0103861201_pi300-10000_cl_sm2.00.img.gz, (220, 225) - (340, 345)
[Sat Jun 23 12:31:42 2012] XMMSAS bgd. selection expression = annulus(24339.165800, 24734.168840, 5223.024150, 10446.048301, X, Y) && !ellipse(14681.421281, 16925.082652, 541.287293, 437.017456, 0.000000, X, Y) && !ellipse(23185.719788, 22810.896027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21854.667800, 22882.760600, 466.164657, 466.164657, 0.000000, X, Y) && !ellipse(13687.584000, 17980.184000, 1984.704057, 1984.704057, 0.000000, X, Y) && !ellipse(16438.853600, 15831.475200, 488.077614, 488.077614, 0.000000, X, Y) && !ellipse(28547.973800, 33098.660200, 367.612811, 367.612811, 0.000000, X, Y) && !ellipse(29315.876000, 36646.308000, 1811.600052, 1811.600052, 0.000000, X, Y) && !ellipse(17904.340820, 35766.023865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27933.326000, 32967.376000, 2981.488086, 2981.488086, 0.000000, X, Y) && !ellipse(27660.294000, 32313.020000, 1470.512042, 1470.512042, 0.000000, X, Y) && !ellipse(27313.018800, 31781.439300, 1426.352041, 329.299209, 112.619000, X, Y) && !ellipse(26858.582000, 30490.188000, 1373.360040, 1373.360040, 0.000000, X, Y) && !ellipse(25972.449320, 28486.921800, 629.276018, 629.276018, 0.000000, X, Y) && !ellipse(15166.495850, 26925.426788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24504.234000, 25503.898000, 1095.200032, 1095.200032, 0.000000, X, Y) && !ellipse(23693.762299, 25592.509155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24139.371796, 23512.370697, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 12:31:42 2012] Writing fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src5.gif
[Sat Jun 23 12:34:21 2012] Mean detx,y = (-66.41, -216.23) 
[Sat Jun 23 12:34:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 12:38:12 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 12:38:13 2012] Setting source spectrum file to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 23 12:38:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 23 13:56:32 2012] Updating aperture counts using extracted products
[Sat Jun 23 13:56:32 2012] Error reading totcts from fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 23 13:56:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 13:56:33 2012] Using photon index=1.80, rate=1.57, arf fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src5.arf
[Sat Jun 23 13:56:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 13:56:33 2012] Updating source flux to 3.8e-12
[Sat Jun 23 13:56:53 2012] Flag c found in src. 5 procflags, skipping spectral fitting