[Sat Jun 23 09:50:58 2012] Detection parameters:
  Position = (278.0, 270.8) = 22 19 19.20 12 7 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.3 +/- 12.0
  Background counts = 21.6
  Rate = 0.005 +/- 0.001

[Sat Jun 23 09:50:58 2012] Off-axis axis estimate = 2.49'
[Sat Jun 23 09:52:16 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 09:52:16 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sat Jun 23 09:52:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.732
[Sat Jun 23 09:52:16 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.67"
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jun 23 11:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src25.csv
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jun 23 11:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src25.csv
[Sat Jun 23 11:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:05:20 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jun 23 11:05:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Jun 23 11:05:20 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jun 23 11:05:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Jun 23 11:05:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:26:35 2012] Source 25 is offset by -6.852301 and 5.491180 pixels which is larger than
2 X fitted extent = 6.450345 x 6.450345, not incorporating fit results
[Sat Jun 23 11:26:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:26:35 2012] Assessing source extent using major
[Sat Jun 23 11:26:35 2012] Source does appear to be extended
[Sat Jun 23 11:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 11:26:49 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:26:49 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sat Jun 23 11:26:49 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.732
[Sat Jun 23 11:26:49 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.67"
[Sat Jun 23 12:24:58 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jun 23 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src20.csv
[Sat Jun 23 12:24:58 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jun 23 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src20.csv
[Sat Jun 23 12:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:24:59 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jun 23 12:24:59 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jun 23 12:24:59 2012] Fit fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Jun 23 12:31:33 2012] Source 25 is offset by -6.930646 and 5.312008 pixels which is larger than
2 X fitted extent = 1.325798 x 1.325798, not incorporating fit results
[Sat Jun 23 12:31:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:31:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:31:33 2012] Assessing source extent using major
[Sat Jun 23 12:31:33 2012] Source does appear to be extended
[Sat Jun 23 12:31:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:31:42 2012] XMMSAS src. selection expression = ellipse(24139.371796, 23512.370697, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 23 12:31:42 2012] Writing source region out to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src25_src.reg
[Sat Jun 23 12:31:42 2012] Extracting stamp from image fullrun_pn_xmm0103861201_pi300-10000_cl_sm2.00.img.gz, (241, 233) - (316, 308)
[Sat Jun 23 12:31:42 2012] XMMSAS bgd. selection expression = annulus(24139.371796, 23512.370697, 1087.500000, 2175.000000, X, Y) && !ellipse(23185.719788, 22810.896027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21854.667800, 22882.760600, 466.164657, 466.164657, 0.000000, X, Y) && !ellipse(24339.165800, 24734.168840, 1392.806440, 1392.806440, 0.000000, X, Y) && !ellipse(24504.234000, 25503.898000, 1095.200032, 1095.200032, 0.000000, X, Y) && !ellipse(23693.762299, 25592.509155, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 12:31:42 2012] Writing fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src25.gif
[Sat Jun 23 12:47:22 2012] Mean detx,y = (-284.47, -1311.30) 
[Sat Jun 23 12:47:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 12:47:54 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 12:47:54 2012] Setting source spectrum file to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jun 23 12:47:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jun 23 13:42:26 2012] Not generating rmf since there are only 47 counts
[Sat Jun 23 13:42:26 2012] rmf not generated due to insufficient counts
[Sat Jun 23 13:56:33 2012] Updating aperture counts using extracted products
[Sat Jun 23 13:56:33 2012] Error reading totcts from fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jun 23 13:56:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 13:56:33 2012] Using photon index=1.80, rate=0.00487, arf fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src25.arf
[Sat Jun 23 13:56:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 13:56:33 2012] Updating source flux to 1.4e-14
[Sat Jun 23 13:56:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting