[Sat Jun 23 09:50:58 2012] Detection parameters:
  Position = (311.2, 356.5) = 22 19 9.37 12 13 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.5 +/- 9.7
  Background counts = 18.3
  Rate = 0.005 +/- 0.001

[Sat Jun 23 09:50:58 2012] Off-axis axis estimate = 4.31'
[Sat Jun 23 09:52:16 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 09:52:16 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Sat Jun 23 09:52:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Sat Jun 23 09:52:16 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.58"
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 23 11:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src17.csv
[Sat Jun 23 11:05:19 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 23 11:05:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src17.csv
[Sat Jun 23 11:05:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:05:20 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 23 11:05:20 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 23 11:05:20 2012] Fit fullrun_pn_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Jun 23 11:26:35 2012] Spatial fit model total counts = 176.067000, observed total counts = 176.000000
[Sat Jun 23 11:26:35 2012] Offset between fit and detection position for source 17 = 5.803031 pixels
[Sat Jun 23 11:26:35 2012] 185.917000 total counts/ 87.104200 bgd. counts: snr = 10.587506
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 5.803031 pixels
  Position = (309.3, 351.0) = 22 19 9.93 12 12 40.8
  Extent = 17.2 (16.6-34.3)", rotation angle = 0
  Source counts = 98.8 +/- 13.6
  Background counts = 87.1
  Rate = 0.01 +/- 0.002
[Sat Jun 23 11:26:35 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:26:35 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 11:26:35 2012] Source does appear to be extended
[Sat Jun 23 11:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 11:26:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:26:49 2012] Initial guess for spatial extent in simple fitting = 17.17"
[Sat Jun 23 11:26:49 2012] source mask rpix=3.9, npix_max = 79, mask sum = 72, frac = 0.910
[Sat Jun 23 11:26:49 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 17.17"
[Sat Jun 23 12:24:58 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src14.ximg exists
[Sat Jun 23 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src14.csv
[Sat Jun 23 12:24:58 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Jun 23 12:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src14.csv
[Sat Jun 23 12:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:24:59 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Jun 23 12:24:59 2012] fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jun 23 12:24:59 2012] Fit fullrun_pn_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sat Jun 23 12:31:33 2012] Warning, spatial fit 14 centroid is now closest to src. 21
[Sat Jun 23 12:31:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:31:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:31:33 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 12:31:33 2012] Source does appear to be extended
[Sat Jun 23 12:31:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:31:42 2012] XMMSAS src. selection expression = ellipse(26858.582000, 30490.188000, 1030.020030, 1030.020030, 0.000000, X, Y)
[Sat Jun 23 12:31:42 2012] Writing source region out to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun 23 12:31:42 2012] Extracting stamp from image fullrun_pn_xmm0103861201_pi300-10000_cl_sm2.00.img.gz, (250, 292) - (368, 410)
[Sat Jun 23 12:31:42 2012] XMMSAS bgd. selection expression = annulus(26858.582000, 30490.188000, 1716.700049, 3433.400099, X, Y) && !ellipse(28547.973800, 33098.660200, 367.612811, 367.612811, 0.000000, X, Y) && !ellipse(27933.326000, 32967.376000, 2981.488086, 2981.488086, 0.000000, X, Y) && !ellipse(27660.294000, 32313.020000, 1470.512042, 1470.512042, 0.000000, X, Y) && !ellipse(27313.018800, 31781.439300, 1426.352041, 329.299209, 112.619000, X, Y) && !ellipse(25972.449320, 28486.921800, 629.276018, 629.276018, 0.000000, X, Y)
[Sat Jun 23 12:31:42 2012] Writing fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src17.gif
[Sat Jun 23 12:44:36 2012] Mean detx,y = (-144.26, 5982.21) 
[Sat Jun 23 12:44:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 12:45:05 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 12:45:06 2012] Setting source spectrum file to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun 23 12:45:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun 23 13:35:18 2012] Not generating rmf since there are only 98 counts
[Sat Jun 23 13:35:18 2012] rmf not generated due to insufficient counts
[Sat Jun 23 13:56:32 2012] Updating aperture counts using extracted products
[Sat Jun 23 13:56:33 2012] Error reading totcts from fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun 23 13:56:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 13:56:33 2012] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0103861201_pi300-10000_pass1_cl_src17.arf
[Sat Jun 23 13:56:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 13:56:33 2012] Updating source flux to 3.8e-14
[Sat Jun 23 13:56:53 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting