[Sat Jun 23 09:51:29 2012] Detection parameters:
  Position = (89.8, 338.2) = 22 20 15.05 12 11 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.6 +/- 7.6
  Background counts = 3.6
  Rate = 0.003 +/- 0.0006

[Sat Jun 23 09:51:29 2012] Off-axis axis estimate = 15.40'
[Sat Jun 23 11:15:46 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:15:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 11:15:46 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Sat Jun 23 11:15:46 2012] source mask rpix=3.2, npix_max = 56, mask sum = 40, frac = 0.712
[Sat Jun 23 11:15:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 14.13"
[Sat Jun 23 11:26:27 2012] fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 23 11:26:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_src4.csv
[Sat Jun 23 11:26:27 2012] fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 23 11:26:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_src4.csv
[Sat Jun 23 11:26:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:26:27 2012] fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 23 11:26:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 23 11:26:27 2012] fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 23 11:26:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 23 11:26:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:26:39 2012] Spatial fit model total counts = 119.898000, observed total counts = 56.000000
[Sat Jun 23 11:26:39 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 23 11:26:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:26:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:26:39 2012] Assessing source extent using major
[Sat Jun 23 11:26:39 2012] Source does appear to be extended
[Sat Jun 23 11:26:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 11:26:39 2012] Deleting source due to low Poisson probability 0.9