[Sat Jun 23 09:51:14 2012] Detection parameters:
  Position = (291.3, 480.7) = 22 19 15.26 12 22 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.2 +/- 7.2
  Background counts = 4.3
  Rate = 0.002 +/- 0.0006

[Sat Jun 23 09:51:14 2012] Off-axis axis estimate = 13.23'
[Sat Jun 23 11:05:20 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:05:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 11:05:20 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Sat Jun 23 11:05:20 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.001
[Sat Jun 23 11:05:20 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.04"
[Sat Jun 23 11:15:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 23 11:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src4.csv
[Sat Jun 23 11:15:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 23 11:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src4.csv
[Sat Jun 23 11:15:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:15:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 23 11:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 23 11:15:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 23 11:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 23 11:15:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:26:37 2012] Spatial fit model total counts = 67.031300, observed total counts = 58.000000
[Sat Jun 23 11:26:37 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 23 11:26:37 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:26:37 2012] Assessing source extent using major
[Sat Jun 23 11:26:37 2012] Source does appear to be extended
[Sat Jun 23 11:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 11:26:37 2012] Deleting source due to low Poisson probability 0.9