[Sat Jun 23 09:51:14 2012] Detection parameters:
  Position = (280.4, 285.0) = 22 19 18.50 12 7 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7509.6 +/- 103.1
  Background counts = 8.9
  Rate = 0.6 +/- 0.009

[Sat Jun 23 09:51:14 2012] Off-axis axis estimate = 1.63'
[Sat Jun 23 11:05:20 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:05:20 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sat Jun 23 11:05:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.066
[Sat Jun 23 11:05:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sat Jun 23 11:15:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 11:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 11:15:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 11:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 11:15:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:15:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 11:15:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 11:15:46 2012] Fit fullrun_mos1_xmm0103861201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 23 11:26:37 2012] Spatial fit model total counts = 6649.970000, observed total counts = 6576.000000
[Sat Jun 23 11:26:37 2012] Offset between fit and detection position for source 2 = 0.043730 pixels
[Sat Jun 23 11:26:37 2012] 6642.370000 total counts/ 1520.340000 bgd. counts: snr = 131.362606
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.043730 pixels
  Position = (280.4, 284.9) = 22 19 18.49 12 7 53.3
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 5122.0 +/- 81.5
  Background counts = 1520.3
  Rate = 0.4 +/- 0.007
[Sat Jun 23 11:26:37 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:26:37 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 11:26:37 2012] Source does appear to be extended
[Sat Jun 23 11:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:24:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:24:59 2012] Initial guess for spatial extent in simple fitting = 5.32"
[Sat Jun 23 12:24:59 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.009
[Sat Jun 23 12:24:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.32"
[Sat Jun 23 12:28:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 12:28:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 12:28:46 2012] Fit fullrun_mos1_xmm0103861201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun 23 12:28:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 12:28:46 2012] fullrun_mos1_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 12:28:46 2012] Fit fullrun_mos1_xmm0103861201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 23 12:31:33 2012] Spatial fit model total counts = 6650.210000, observed total counts = 6576.000000
[Sat Jun 23 12:31:33 2012] Offset between fit and detection position for source 2 = 0.002031 pixels
[Sat Jun 23 12:31:33 2012] 6643.420000 total counts/ 1525.780000 bgd. counts: snr = 131.015830
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002031 pixels
  Position = (280.4, 284.9) = 22 19 18.49 12 7 53.3
  Extent = 5.5 (5.4-5.7)" x 5.1 (5.0-5.3)", rotation angle = 19 (5-35) degrees
  Source counts = 5117.6 +/- 81.5
  Background counts = 1525.8
  Rate = 0.4 +/- 0.007
[Sat Jun 23 12:31:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:31:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:31:33 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 12:31:33 2012] Source does appear to be extended
[Sat Jun 23 12:31:33 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Sat Jun 23 13:47:24 2012] Counts = 5117.640000, rescaling region sizes by 2.000000
[Sat Jun 23 13:47:24 2012] XMMSAS src. selection expression = ellipse(24348.677800, 24738.612200, 661.935619, 612.591618, 18.890359, X, Y)
[Sat Jun 23 13:47:24 2012] Writing source region out to fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 23 13:47:24 2012] Extracting stamp from image fullrun_mos1_xmm0103861201_pi300-10000_cl_sm2.00.img.gz, (242, 247) - (318, 323)
[Sat Jun 23 13:47:24 2012] XMMSAS bgd. selection expression = annulus(24348.677800, 24738.612200, 2206.452063, 4412.904127, X, Y)
[Sat Jun 23 13:47:24 2012] Writing fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2.gif
[Sat Jun 23 13:47:26 2012] Mean detx,y = (292.48, -392.82) 
[Sat Jun 23 13:47:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 13:47:53 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 13:47:53 2012] Setting source spectrum file to fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 23 13:47:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 23 13:56:33 2012] Updating aperture counts using extracted products
[Sat Jun 23 13:56:33 2012] Error reading totcts from fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 23 13:56:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 13:56:33 2012] Using photon index=1.80, rate=0.418, arf fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2.arf
[Sat Jun 23 13:56:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 13:56:33 2012] Updating source flux to 4.3e-12
[Sat Jun 23 13:56:44 2012] Reading fit data from xmm0103861201/analysis//spectral/fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jun 23 13:56:44 2012] Spectral fit parameter nH value = 3.62026e+20
[Sat Jun 23 13:56:44 2012] Spectral fit parameter PhoIndex value = 2.85737
[Sat Jun 23 13:56:44 2012] Failed to get F(0.3-8.0) from xmm0103861201/analysis//spectral/fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jun 23 13:56:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 13:56:44 2012] Using Nh = 3.6e+20, photon index=2.86, rate=0.418, arf fullrun_mos1_xmm0103861201_pi300-10000_pass1_cl_src2.arf
[Sat Jun 23 13:56:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 13:56:44 2012] Updating source flux to 3.2e-12