[Sat Jun 23 10:13:32 2012] Detection parameters:
  Position = (274.8, 289.8) = 2 35 13.28 -29 36 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11650.9 +/- 128.8
  Background counts = 111.9
  Rate = 3 +/- 0.03

[Sat Jun 23 10:13:33 2012] Off-axis axis estimate = 1.82'
[Sat Jun 23 10:16:27 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 10:16:27 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sat Jun 23 10:16:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Sat Jun 23 10:16:27 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.34"
[Sat Jun 23 10:27:01 2012] fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 23 10:27:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_src2.csv
[Sat Jun 23 10:27:01 2012] fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 23 10:27:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_src2.csv
[Sat Jun 23 10:27:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 10:27:01 2012] fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 23 10:27:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 23 10:27:01 2012] fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 23 10:27:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 23 10:27:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103861101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 10:40:08 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.278825 pixels away
[Sat Jun 23 10:40:08 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 10:40:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 10:40:08 2012] Assessing source extent using major
[Sat Jun 23 10:40:08 2012] Source does appear to be extended
[Sat Jun 23 10:40:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 10:40:18 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 10:40:18 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sat Jun 23 10:40:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Sat Jun 23 10:40:18 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.34"
[Sat Jun 23 10:51:13 2012] fullrun_pn_xmm0103861101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 23 10:51:13 2012] fullrun_pn_xmm0103861101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 23 10:51:13 2012] Fit fullrun_pn_xmm0103861101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat Jun 23 10:51:13 2012] fullrun_pn_xmm0103861101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 23 10:51:13 2012] fullrun_pn_xmm0103861101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 23 10:51:13 2012] Fit fullrun_pn_xmm0103861101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun 23 11:03:43 2012] Spatial fit model total counts = 9342.500000, observed total counts = 9049.000000
[Sat Jun 23 11:03:43 2012] Offset between fit and detection position for source 2 = 0.136971 pixels
[Sat Jun 23 11:03:43 2012] 9344.670000 total counts/ 2799.940000 bgd. counts: snr = 123.685096
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.136971 pixels
  Position = (274.8, 289.7) = 2 35 13.29 -29 36 18.2
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 6544.7 +/- 96.7
  Background counts = 2799.9
  Rate = 2 +/- 0.02
[Sat Jun 23 11:03:43 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:03:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:03:43 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 11:03:43 2012] Source does appear to be extended
[Sat Jun 23 11:03:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 11:03:53 2012] Counts = 6544.730000, rescaling region sizes by 2.000000
[Sat Jun 23 11:03:53 2012] XMMSAS src. selection expression = ellipse(23860.870600, 25152.135400, 675.110419, 675.110419, 0.000000, X, Y)
[Sat Jun 23 11:03:53 2012] Writing source region out to fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 23 11:03:53 2012] Extracting stamp from image fullrun_pn_xmm0103861101_pi300-10000_cl_sm2.00.img.gz, (236, 251) - (314, 328)
[Sat Jun 23 11:03:53 2012] XMMSAS bgd. selection expression = annulus(23860.870600, 25152.135400, 2250.368065, 4500.736130, X, Y) && !ellipse(28774.516632, 27332.190552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24106.781311, 24471.298248, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 11:03:53 2012] Writing fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2.gif
[Sat Jun 23 11:09:13 2012] Mean detx,y = (149.03, -355.01) 
[Sat Jun 23 11:09:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 11:10:34 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 11:10:35 2012] Setting source spectrum file to fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 23 11:10:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 23 11:49:13 2012] Updating aperture counts using extracted products
[Sat Jun 23 11:49:13 2012] Error reading totcts from fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 23 11:49:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 11:49:13 2012] Using photon index=1.80, rate=1.62, arf fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2.arf
[Sat Jun 23 11:49:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 11:49:13 2012] Updating source flux to 4.1e-12
[Sat Jun 23 11:49:52 2012] Reading fit data from xmm0103861101/analysis//spectral/fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jun 23 11:49:52 2012] Spectral fit parameter nH value = 7.85978e+12
[Sat Jun 23 11:49:52 2012] Spectral fit parameter PhoIndex value = 1.73438
[Sat Jun 23 11:49:52 2012] Failed to get F(0.3-8.0) from xmm0103861101/analysis//spectral/fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jun 23 11:49:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 11:49:52 2012] Using Nh = 7.9e+12, photon index=1.73, rate=1.62, arf fullrun_pn_xmm0103861101_pi300-10000_pass1_cl_src2.arf
[Sat Jun 23 11:49:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 11:49:52 2012] Updating source flux to 4.3e-12