[Mon May 13 00:41:04 2013] Detection parameters:
  Position = (313.7, 374.0) = 1 20 22.54 -44 2 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.6 +/- 8.8
  Background counts = 14.4
  Rate = 0.003 +/- 0.0007

[Mon May 13 00:41:05 2013] Off-axis axis estimate = 5.59'
[Mon May 13 00:41:53 2013] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:41:53 2013] Initial guess for spatial extent in simple fitting = 9.22"
[Mon May 13 00:41:53 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.093
[Mon May 13 00:41:53 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 9.22"
[Mon May 13 00:41:54 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src60.ximg exists
[Mon May 13 00:41:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src60.csv
[Mon May 13 00:41:54 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src60_1.ximg exists
[Mon May 13 00:41:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src60.csv
[Mon May 13 00:41:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:41:56 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Mon May 13 00:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src60.csv
[Mon May 13 00:41:56 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Mon May 13 00:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src60.csv
[Mon May 13 00:41:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:42:27 2013] Spatial fit model total counts = 217.015000, observed total counts = 173.000000
[Mon May 13 00:42:27 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 00:42:27 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:42:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:42:27 2013] Assessing source extent using major
[Mon May 13 00:42:27 2013] Source does appear to be extended
[Mon May 13 00:42:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:42:59 2013] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:42:59 2013] Initial guess for spatial extent in simple fitting = 9.22"
[Mon May 13 00:42:59 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.093
[Mon May 13 00:42:59 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 9.22"
[Mon May 13 00:43:01 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src57.ximg exists
[Mon May 13 00:43:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src57.csv
[Mon May 13 00:43:01 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src57_1.ximg exists
[Mon May 13 00:43:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src57.csv
[Mon May 13 00:43:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:43:02 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Mon May 13 00:43:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src57.csv
[Mon May 13 00:43:02 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Mon May 13 00:43:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src57.csv
[Mon May 13 00:43:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:43:28 2013] Source 61 is offset by 1.681754 and 5.989494 pixels which is larger than
2 X fitted extent = 0.996524 x 0.996524, not incorporating fit results
[Mon May 13 00:43:28 2013] Source 61 is offset by 2.854038 and -9.436254 pixels which is larger than
2 X fitted extent = 8.479403 x 8.479403, not incorporating fit results
[Mon May 13 00:43:28 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:43:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:43:28 2013] Assessing source extent using major
[Mon May 13 00:43:28 2013] Source does appear to be extended
[Mon May 13 00:43:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:44:03 2013] XMMSAS src. selection expression = ellipse(27239.394623, 32486.167938, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 00:44:03 2013] Not overwriting source region fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_src.reg
[Mon May 13 00:44:03 2013] Extracting stamp from image fullrun_pn_xmm0103860901_pi300-10000_cl_sm2.00.img.gz, (276, 336) - (351, 411)
[Mon May 13 00:44:03 2013] XMMSAS bgd. selection expression = annulus(27239.394623, 32486.167938, 1087.500000, 2175.000000, X, Y) && !ellipse(27887.800568, 35489.181305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28079.695465, 33196.576782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26476.092285, 31265.077484, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 00:44:03 2013] Writing fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61.gif
[Mon May 13 00:44:10 2013] ../../xmm0103860901/products/events/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_src.evt and ../../xmm0103860901/products/events/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_bgd.evt exist, delete to re-create
[Mon May 13 00:44:10 2013] Mean detx,y = (-3501.82, -4763.68) 
[Mon May 13 00:44:10 2013] ../../xmm0103860901/products/images/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_src.img and ../../xmm0103860901/products/images/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_bgd.img exist, delete to re-create
[Mon May 13 00:44:10 2013] ../../xmm0103860901/products/spectra/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_src_b10.pi.gz and ../../xmm0103860901/products/spectra/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_bgd.pi exist, delete to re-create
[Mon May 13 00:44:10 2013] Setting source spectrum file to fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Mon May 13 00:44:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Mon May 13 00:44:10 2013] ../../xmm0103860901/products/lightcurves/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_src.lc and ../../xmm0103860901/products/lightcurves/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_bgd.lc exist, delete to re-create
[Mon May 13 00:44:31 2013] Not generating rmf since there are only 37 counts
[Mon May 13 00:44:31 2013] rmf not generated due to insufficient counts
[Mon May 13 00:44:31 2013] fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61.arf exists, delete to re-create
[Mon May 13 00:52:25 2013] Updating aperture counts using extracted products
[Mon May 13 00:52:25 2013] Total counts from fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 130.00
[Mon May 13 00:52:25 2013] Total counts from fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_bgd.pi.gz = 436.00
[Mon May 13 00:52:25 2013] Got source and background scale factors 1134690.000000, 6552711.000000
[Mon May 13 00:52:25 2013] User source parameters:
  Position = (313.7, 374.0) = 1 20 22.54 -44 2 56.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 54.5 +/- 12.4
  Background aperture counts = 75.5
  Rate = 0.003 +/- 0.0007

[Mon May 13 00:52:25 2013] Updating counts from extracted products
[Mon May 13 00:52:25 2013] Set source signif. to 54.50/8.69 = 6.27
[Mon May 13 00:52:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 00:52:30 2013] Using photon index=1.80, rate=0.00285, arf fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61.arf
[Mon May 13 00:52:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 00:52:30 2013] Updating source flux to 1.1e-14
[Mon May 13 00:52:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 00:53:20 2013] xmm0103860901/analysis//spectral/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete