[Mon May 13 00:41:00 2013] Detection parameters: Position = (320.2, 510.8) = 1 20 19.90 -43 53 0.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 245.3 +/- 19.8 Background counts = 13.6 Rate = 0.01 +/- 0.001 [Mon May 13 00:41:05 2013] Off-axis axis estimate = 15.48' [Mon May 13 00:41:53 2013] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting [Mon May 13 00:41:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 13 00:41:53 2013] Initial guess for spatial extent in simple fitting = 14.17" [Mon May 13 00:41:53 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.134 [Mon May 13 00:41:53 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 14.17" [Mon May 13 00:41:53 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src10.ximg exists [Mon May 13 00:41:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src10.csv [Mon May 13 00:41:53 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src10_1.ximg exists [Mon May 13 00:41:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src10.csv [Mon May 13 00:41:54 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 13 00:41:55 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Mon May 13 00:41:55 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Mon May 13 00:41:55 2013] Fit fullrun_pn_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Mon May 13 00:42:27 2013] Spatial fit model total counts = 416.867000, observed total counts = 417.000000 [Mon May 13 00:42:27 2013] Offset between fit and detection position for source 10 = 0.153743 pixels [Mon May 13 00:42:27 2013] 416.247000 total counts/ 238.184000 bgd. counts: snr = 11.537651 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.153743 pixels Position = (320.3, 510.6) = 1 20 19.87 -43 53 2.4 Extent = 8.2 (6.8-9.4)", rotation angle = 0 Source counts = 178.1 +/- 20.4 Background counts = 238.2 Rate = 0.009 +/- 0.001 [Mon May 13 00:42:27 2013] Vigneting correction estimate = 1.000000 [Mon May 13 00:42:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 13 00:42:27 2013] Assessing source extent using major axis lower bound [Mon May 13 00:42:27 2013] Source does appear to be extended [Mon May 13 00:42:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 13 00:42:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 13 00:42:59 2013] Initial guess for spatial extent in simple fitting = 8.15" [Mon May 13 00:42:59 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.109 [Mon May 13 00:42:59 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.15" [Mon May 13 00:43:00 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src10.ximg exists [Mon May 13 00:43:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src10.csv [Mon May 13 00:43:00 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src10_1.ximg exists [Mon May 13 00:43:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src10.csv [Mon May 13 00:43:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 13 00:43:01 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Mon May 13 00:43:02 2013] fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Mon May 13 00:43:02 2013] Fit fullrun_pn_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly [Mon May 13 00:43:28 2013] Spatial fit model total counts = 334.825000, observed total counts = 335.000000 [Mon May 13 00:43:28 2013] Offset between fit and detection position for source 10 = 0.020506 pixels [Mon May 13 00:43:28 2013] 332.779000 total counts/ 164.227000 bgd. counts: snr = 13.152601 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.020506 pixels Position = (320.3, 510.7) = 1 20 19.87 -43 53 2.3 Extent = 7.7 (6.4-9.1)", rotation angle = 0 Source counts = 168.6 +/- 18.2 Background counts = 164.2 Rate = 0.009 +/- 0.001 [Mon May 13 00:43:28 2013] Vigneting correction estimate = 1.000000 [Mon May 13 00:43:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 13 00:43:28 2013] Assessing source extent using major axis lower bound [Mon May 13 00:43:28 2013] Source does appear to be extended [Mon May 13 00:43:28 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 13 00:44:01 2013] XMMSAS src. selection expression = ellipse(27820.349000, 44379.443000, 464.666413, 464.666413, 0.000000, X, Y) [Mon May 13 00:44:01 2013] Not overwriting source region fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_src.reg [Mon May 13 00:44:01 2013] Extracting stamp from image fullrun_pn_xmm0103860901_pi300-10000_cl_sm2.00.img.gz, (294, 484) - (347, 537) [Mon May 13 00:44:01 2013] XMMSAS bgd. selection expression = annulus(27820.349000, 44379.443000, 774.444022, 1548.888045, X, Y) [Mon May 13 00:44:01 2013] Writing fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10.gif [Mon May 13 00:44:05 2013] ../../xmm0103860901/products/events/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0103860901/products/events/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create [Mon May 13 00:44:05 2013] Mean detx,y = (-9314.37, -15135.40) [Mon May 13 00:44:05 2013] ../../xmm0103860901/products/images/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_src.img and ../../xmm0103860901/products/images/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create [Mon May 13 00:44:05 2013] ../../xmm0103860901/products/spectra/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0103860901/products/spectra/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create [Mon May 13 00:44:05 2013] Setting source spectrum file to fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Mon May 13 00:44:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_bgd.pi.gz [Mon May 13 00:44:05 2013] ../../xmm0103860901/products/lightcurves/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0103860901/products/lightcurves/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create [Mon May 13 00:44:31 2013] fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10.rmf exists, delete to re-create [Mon May 13 00:44:31 2013] fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10.arf exists, delete to re-create [Mon May 13 00:52:09 2013] Updating aperture counts using extracted products [Mon May 13 00:52:09 2013] Total counts from fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 230.00 [Mon May 13 00:52:09 2013] Total counts from fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_bgd.pi.gz = 370.00 [Mon May 13 00:52:09 2013] Got source and background scale factors 683200.000000, 5145908.000000 [Mon May 13 00:52:09 2013] User source parameters: Position = (320.3, 510.7) = 1 20 19.87 -43 53 2.3 Extent = 7.7 (6.4-9.1)", rotation angle = 0 Source aperture counts = 180.9 +/- 16.2 Background aperture counts = 49.1 Rate = 0.009 +/- 0.0008 [Mon May 13 00:52:28 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 13 00:52:28 2013] Using photon index=1.80, rate=0.00883, arf fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10.arf [Mon May 13 00:52:28 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 13 00:52:28 2013] Updating source flux to 9.6e-14 [Mon May 13 00:53:20 2013] xmm0103860901/analysis//spectral/fullrun_pn_xmm0103860901_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete