[Mon May 13 00:41:11 2013] Detection parameters:
  Position = (321.5, 307.8) = 1 20 19.38 -44 7 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14225.4 +/- 140.5
  Background counts = 6.4
  Rate = 0.7 +/- 0.007

[Mon May 13 00:41:13 2013] Off-axis axis estimate = 1.80'
[Mon May 13 00:41:58 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:41:58 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Mon May 13 00:41:58 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Mon May 13 00:41:58 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Mon May 13 00:42:01 2013] fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 13 00:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_src1.csv
[Mon May 13 00:42:01 2013] fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 13 00:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_src1.csv
[Mon May 13 00:42:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:42:01 2013] fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 00:42:01 2013] fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 00:42:01 2013] Fit fullrun_mos2_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 13 00:42:43 2013] Spatial fit model total counts = 12793.900000, observed total counts = 12469.000000
[Mon May 13 00:42:43 2013] Offset between fit and detection position for source 1 = 0.254873 pixels
[Mon May 13 00:42:43 2013] 12785.590000 total counts/ 2847.580000 bgd. counts: snr = 186.235068
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.254873 pixels
  Position = (321.3, 307.5) = 1 20 19.44 -44 7 45.8
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 9938.0 +/- 113.1
  Background counts = 2847.6
  Rate = 0.5 +/- 0.005
[Mon May 13 00:42:43 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:42:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:42:43 2013] Assessing source extent using major axis lower bound
[Mon May 13 00:42:43 2013] Source does appear to be extended
[Mon May 13 00:42:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:43:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 00:43:04 2013] Initial guess for spatial extent in simple fitting = 5.36"
[Mon May 13 00:43:04 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.750
[Mon May 13 00:43:04 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.36"
[Mon May 13 00:43:05 2013] fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 13 00:43:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_src1.csv
[Mon May 13 00:43:05 2013] fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 13 00:43:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_src1.csv
[Mon May 13 00:43:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:43:06 2013] fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 00:43:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 00:43:06 2013] fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 00:43:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 00:43:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:43:39 2013] Warning, spatial fit 1 centroid is now closest to src. 17
[Mon May 13 00:43:39 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:43:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:43:39 2013] Assessing source extent using major axis lower bound
[Mon May 13 00:43:39 2013] Source does appear to be extended
[Mon May 13 00:43:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:51:19 2013] Counts = 9938.010000, rescaling region sizes by 2.000000
[Mon May 13 00:51:19 2013] XMMSAS src. selection expression = ellipse(27905.306800, 26708.275000, 642.975619, 642.975619, 0.000000, X, Y)
[Mon May 13 00:51:19 2013] Not overwriting source region fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_src.reg
[Mon May 13 00:51:19 2013] Extracting stamp from image fullrun_mos2_xmm0103860901_pi300-10000_cl_sm2.00.img.gz, (284, 271) - (358, 345)
[Mon May 13 00:51:19 2013] XMMSAS bgd. selection expression = annulus(27905.306800, 26708.275000, 2143.252062, 4286.504123, X, Y)
[Mon May 13 00:51:19 2013] Writing fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1.gif
[Mon May 13 00:51:19 2013] ../../xmm0103860901/products/events/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0103860901/products/events/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon May 13 00:51:19 2013] Mean detx,y = (-49.48, 104.28) 
[Mon May 13 00:51:19 2013] ../../xmm0103860901/products/images/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_src.img and ../../xmm0103860901/products/images/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon May 13 00:51:19 2013] ../../xmm0103860901/products/spectra/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0103860901/products/spectra/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon May 13 00:51:19 2013] Setting source spectrum file to fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 13 00:51:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 13 00:51:19 2013] ../../xmm0103860901/products/lightcurves/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0103860901/products/lightcurves/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon May 13 00:51:28 2013] fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Mon May 13 00:51:28 2013] fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Mon May 13 00:52:42 2013] Updating aperture counts using extracted products
[Mon May 13 00:52:42 2013] Total counts from fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 12107.00
[Mon May 13 00:52:42 2013] Total counts from fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_bgd.pi.gz = 0.00
[Mon May 13 00:52:42 2013] Got source and background scale factors 1184304.000000, 0.000000
[Mon May 13 00:52:42 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon May 13 00:52:47 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 00:52:47 2013] Using photon index=1.80, rate=0.462, arf fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1.arf
[Mon May 13 00:52:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 00:52:47 2013] Updating source flux to 5.2e-12
[Mon May 13 00:52:59 2013] xmm0103860901/analysis//spectral/fullrun_mos2_xmm0103860901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete