[Mon May 13 00:41:07 2013] Detection parameters:
  Position = (323.4, 447.8) = 1 20 18.61 -43 57 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.4 +/- 7.4
  Background counts = 5.6
  Rate = 0.001 +/- 0.0003

[Mon May 13 00:41:09 2013] Off-axis axis estimate = 10.98'
[Mon May 13 00:41:56 2013] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:41:56 2013] Initial guess for spatial extent in simple fitting = 11.92"
[Mon May 13 00:41:56 2013] source mask rpix=2.7, npix_max = 41, mask sum = 41, frac = 0.977
[Mon May 13 00:41:56 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 11.92"
[Mon May 13 00:41:57 2013] fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_src24.ximg exists
[Mon May 13 00:41:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_src24.csv
[Mon May 13 00:41:57 2013] fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon May 13 00:41:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_src24.csv
[Mon May 13 00:41:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:41:58 2013] fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon May 13 00:41:58 2013] fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon May 13 00:41:58 2013] Fit fullrun_mos1_xmm0103860901_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon May 13 00:42:34 2013] Spatial fit model total counts = 75.070300, observed total counts = 69.000000
[Mon May 13 00:42:34 2013] Offset between fit and detection position for source 3 = 1.619635 pixels
[Mon May 13 00:42:34 2013] 76.528400 total counts/ 21.440700 bgd. counts: snr = 11.896937
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.619635 pixels
  Position = (323.1, 446.2) = 1 20 18.73 -43 57 42.8
  Extent = 12.7 (4.5-20.3)", rotation angle = 0
  Source counts = 55.1 +/- 8.7
  Background counts = 21.4
  Rate = 0.003 +/- 0.0004
[Mon May 13 00:42:34 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:42:34 2013] Assessing source extent using major axis lower bound
[Mon May 13 00:42:34 2013] Source does appear to be extended
[Mon May 13 00:42:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:43:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 00:43:02 2013] Initial guess for spatial extent in simple fitting = 12.68"
[Mon May 13 00:43:02 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.051
[Mon May 13 00:43:02 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 12.68"
[Mon May 13 00:43:04 2013] fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_src23.ximg exists
[Mon May 13 00:43:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_src23.csv
[Mon May 13 00:43:04 2013] fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon May 13 00:43:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_src23.csv
[Mon May 13 00:43:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:43:04 2013] fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon May 13 00:43:04 2013] fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon May 13 00:43:04 2013] Fit fullrun_mos1_xmm0103860901_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon May 13 00:43:33 2013] Spatial fit model total counts = 79.275600, observed total counts = 75.000000
[Mon May 13 00:43:33 2013] Offset between fit and detection position for source 3 = 0.512474 pixels
[Mon May 13 00:43:33 2013] 80.890200 total counts/ 42.297500 bgd. counts: snr = 5.934004
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.512474 pixels
  Position = (323.1, 446.7) = 1 20 18.76 -43 57 40.6
  Extent = 10.0 (4.1-17.7)", rotation angle = 0
  Source counts = 38.6 +/- 9.0
  Background counts = 42.3
  Rate = 0.002 +/- 0.0004
[Mon May 13 00:43:33 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:43:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:43:33 2013] Assessing source extent using major axis lower bound
[Mon May 13 00:43:33 2013] Source does appear to be extended
[Mon May 13 00:43:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:44:31 2013] XMMSAS src. selection expression = ellipse(28057.338200, 38813.825180, 602.088017, 602.088017, 0.000000, X, Y)
[Mon May 13 00:44:31 2013] Not overwriting source region fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_src.reg
[Mon May 13 00:44:31 2013] Extracting stamp from image fullrun_mos1_xmm0103860901_pi300-10000_cl_sm2.00.img.gz, (288, 412) - (358, 481)
[Mon May 13 00:44:32 2013] XMMSAS bgd. selection expression = annulus(28057.338200, 38813.825180, 1003.480029, 2006.960058, X, Y) && !ellipse(28005.861755, 41665.140533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.293995, 40144.731432, 568.625153, 316.908431, 323.343192, X, Y)
[Mon May 13 00:44:32 2013] Writing fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3.gif
[Mon May 13 00:44:33 2013] ../../xmm0103860901/products/events/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0103860901/products/events/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon May 13 00:44:33 2013] Mean detx,y = (10593.96, -6444.38) 
[Mon May 13 00:44:33 2013] ../../xmm0103860901/products/images/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_src.img and ../../xmm0103860901/products/images/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon May 13 00:44:33 2013] ../../xmm0103860901/products/spectra/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0103860901/products/spectra/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon May 13 00:44:33 2013] Setting source spectrum file to fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 13 00:44:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 13 00:44:33 2013] ../../xmm0103860901/products/lightcurves/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0103860901/products/lightcurves/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon May 13 00:50:56 2013] Not generating rmf since there are only 38 counts
[Mon May 13 00:50:56 2013] rmf not generated due to insufficient counts
[Mon May 13 00:52:40 2013] Updating aperture counts using extracted products
[Mon May 13 00:52:40 2013] Total counts from fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 56.00
[Mon May 13 00:52:40 2013] Total counts from fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_bgd.pi.gz = 239.00
[Mon May 13 00:52:40 2013] Got source and background scale factors 964442.000000, 8858396.000000
[Mon May 13 00:52:40 2013] User source parameters:
  Position = (323.1, 446.7) = 1 20 18.76 -43 57 40.6
  Extent = 10.0 (4.1-17.7)", rotation angle = 0
  Source aperture counts = 30.0 +/- 8.5
  Background aperture counts = 26.0
  Rate = 0.001 +/- 0.0004

[Mon May 13 00:52:42 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 00:52:42 2013] Using photon index=1.80, rate=0.0018, arf fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3.arf
[Mon May 13 00:52:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 00:52:42 2013] Updating source flux to 4.1e-14
[Mon May 13 00:52:51 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 00:52:53 2013] xmm0103860901/analysis//spectral/fullrun_mos1_xmm0103860901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete