[Fri Nov 25 02:23:32 2011] Detection parameters:
  Position = (212.5, 274.2) = 5 16 42.02 -10 33 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.8 +/- 19.5
  Background counts = 30.4
  Rate = 0.08 +/- 0.006

[Fri Nov 25 02:23:33 2011] Off-axis axis estimate = 6.47'
[Fri Nov 25 02:25:42 2011] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 02:25:42 2011] Initial guess for spatial extent in simple fitting = 9.66"
[Fri Nov 25 02:25:42 2011] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.743
[Fri Nov 25 02:25:42 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.66"
[Fri Nov 25 02:52:42 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src3.ximg exists
[Fri Nov 25 02:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src3.csv
[Fri Nov 25 02:52:42 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Nov 25 02:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src3.csv
[Fri Nov 25 02:52:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 02:52:42 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Nov 25 02:52:42 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Nov 25 02:52:42 2011] Fit fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Nov 25 03:01:33 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.777286 pixels away
[Fri Nov 25 03:01:33 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 03:01:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 03:01:33 2011] Assessing source extent using major
[Fri Nov 25 03:01:33 2011] Source does appear to be extended
[Fri Nov 25 03:01:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 03:01:42 2011] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 03:01:42 2011] Initial guess for spatial extent in simple fitting = 9.66"
[Fri Nov 25 03:01:42 2011] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.743
[Fri Nov 25 03:01:42 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.66"
[Fri Nov 25 03:19:38 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_src3.ximg exists
[Fri Nov 25 03:19:38 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 03:19:38 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Nov 25 03:19:38 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 03:19:38 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 03:19:38 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Nov 25 03:19:38 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Nov 25 03:19:38 2011] Fit fullrun_pn_xmm0103860701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Nov 25 03:25:02 2011] Spatial fit model total counts = 122.999000, observed total counts = 123.000000
[Fri Nov 25 03:25:02 2011] Offset between fit and detection position for source 3 = 1.001911 pixels
[Fri Nov 25 03:25:02 2011] 124.635700 total counts/ 62.423600 bgd. counts: snr = 7.874091
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.001911 pixels
  Position = (212.4, 275.2) = 5 16 42.07 -10 34 1.5
  Extent = 4.2 (3.4-5.1)", rotation angle = 0
  Source counts = 62.2 +/- 11.2
  Background counts = 62.4
  Rate = 0.03 +/- 0.006
[Fri Nov 25 03:25:02 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 03:25:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 03:25:02 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 03:25:02 2011] Source does appear to be extended
[Fri Nov 25 03:25:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 03:25:11 2011] XMMSAS src. selection expression = ellipse(18428.295400, 23895.093080, 253.344607, 253.344607, 0.000000, X, Y)
[Fri Nov 25 03:25:11 2011] Writing source region out to fullrun_pn_xmm0103860701_pi300-10000_pass1_cl_src3_src.reg
[Fri Nov 25 03:25:11 2011] Extracting stamp from image fullrun_pn_xmm0103860701_pi300-10000_cl_sm2.00.img.gz, (198, 261) - (227, 290)
[Fri Nov 25 03:25:11 2011] XMMSAS bgd. selection expression = annulus(18428.295400, 23895.093080, 422.241012, 844.482024, X, Y)
[Fri Nov 25 03:25:11 2011] Writing fullrun_pn_xmm0103860701_pi300-10000_pass1_cl_src3.gif
[Fri Nov 25 03:28:05 2011] Mean detx,y = (6167.10, -1359.64) 
[Fri Nov 25 03:28:10 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 03:28:33 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 03:28:33 2011] Setting source spectrum file to fullrun_pn_xmm0103860701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Nov 25 03:28:33 2011] Setting bgd. spectrum file to fullrun_pn_xmm0103860701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Nov 25 03:44:41 2011] Not generating rmf since there are only 62 counts
[Fri Nov 25 03:44:41 2011] rmf not generated due to insufficient counts
[Fri Nov 25 03:53:20 2011] Updating aperture counts using extracted products
[Fri Nov 25 03:53:20 2011] Error reading totcts from fullrun_pn_xmm0103860701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Nov 25 03:53:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 03:53:21 2011] Using photon index=1.80, rate=0.0309, arf fullrun_pn_xmm0103860701_pi300-10000_pass1_cl_src3.arf
[Fri Nov 25 03:53:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 03:53:21 2011] Updating source flux to 1.5e-13
[Fri Nov 25 03:53:42 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting