[Fri Nov 25 02:23:33 2011] Detection parameters:
  Position = (344.3, 226.1) = 5 16 3.14 -10 37 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.7 +/- 11.4
  Background counts = 29.3
  Rate = 0.02 +/- 0.004

[Fri Nov 25 02:23:33 2011] Off-axis axis estimate = 6.21'
[Fri Nov 25 02:25:42 2011] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 02:25:42 2011] Initial guess for spatial extent in simple fitting = 9.53"
[Fri Nov 25 02:25:42 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.035
[Fri Nov 25 02:25:42 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 9.53"
[Fri Nov 25 02:52:42 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src10.ximg exists
[Fri Nov 25 02:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src10.csv
[Fri Nov 25 02:52:42 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Nov 25 02:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src10.csv
[Fri Nov 25 02:52:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 02:52:42 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Nov 25 02:52:42 2011] fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Nov 25 02:52:42 2011] Fit fullrun_pn_xmm0103860701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Nov 25 03:01:33 2011] Spatial fit model total counts = 58.204600, observed total counts = 62.000000
[Fri Nov 25 03:01:33 2011] Offset between fit and detection position for source 11 = 0.248957 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.248957 pixels
  Position = (344.4, 226.4) = 5 16 3.13 -10 37 33.9
  Extent = 15.2 (7.4-19.1)", rotation angle = 0
  Source counts = 52.6 +/- 7.3
  Background counts = 0.0
  Rate = 0.03 +/- 0.004
 Deleting source due to low signal-to-noise ratio