[Fri Aug 31 10:06:57 2012] Detection parameters:
  Position = (372.9, 215.7) = 15 16 20.24 0 7 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.3 +/- 9.5
  Background counts = 13.1
  Rate = 0.004 +/- 0.001

[Fri Aug 31 10:06:57 2012] Off-axis axis estimate = 8.07'
[Fri Aug 31 13:06:45 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 13:06:45 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Aug 31 13:06:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Fri Aug 31 13:06:45 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.46"
[Fri Aug 31 14:28:31 2012] fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_src23.ximg exists
[Fri Aug 31 14:28:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_src23.csv
[Fri Aug 31 14:28:31 2012] fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Aug 31 14:28:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_src23.csv
[Fri Aug 31 14:28:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 14:28:32 2012] fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Aug 31 14:28:32 2012] fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Aug 31 14:28:32 2012] Fit fullrun_mos2_xmm0103860601_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Aug 31 14:28:55 2012] Source 26 is offset by 0.876377 and -5.271381 pixels which is larger than
2 X fitted extent = 1.245945 x 1.245945, not incorporating fit results
[Fri Aug 31 14:28:55 2012] Source 26 is offset by -2.575164 and -6.047289 pixels which is larger than
2 X fitted extent = 1.202749 x 1.202749, not incorporating fit results
[Fri Aug 31 14:28:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 14:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 14:28:55 2012] Assessing source extent using major
[Fri Aug 31 14:28:55 2012] Source does appear to be extended
[Fri Aug 31 14:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 14:28:55 2012] Source is confused with source 29
[Fri Aug 31 16:49:39 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 16:49:39 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Aug 31 16:49:39 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Fri Aug 31 16:49:39 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.46"
[Fri Aug 31 17:57:03 2012] fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_src19.ximg exists
[Fri Aug 31 17:57:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_src19.csv
[Fri Aug 31 17:57:03 2012] fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Aug 31 17:57:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_src19.csv
[Fri Aug 31 17:57:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 17:57:04 2012] fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Aug 31 17:57:04 2012] fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Aug 31 17:57:04 2012] Fit fullrun_mos2_xmm0103860601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Aug 31 17:57:22 2012] Source 26 is offset by -2.549278 and -6.019289 pixels which is larger than
2 X fitted extent = 1.202749 x 1.202749, not incorporating fit results
[Fri Aug 31 17:57:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:57:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:57:22 2012] Assessing source extent using major
[Fri Aug 31 17:57:22 2012] Source does appear to be extended
[Fri Aug 31 17:57:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 18:12:05 2012] XMMSAS src. selection expression = ellipse(32394.566772, 18717.067856, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 18:12:05 2012] Writing source region out to fullrun_mos2_xmm0103860601_pi300-10000_pass1_cl_src26_src.reg
[Fri Aug 31 18:12:05 2012] Extracting stamp from image fullrun_mos2_xmm0103860601_pi300-10000_cl_sm2.00.img.gz, (335, 178) - (410, 253)
[Fri Aug 31 18:12:05 2012] XMMSAS bgd. selection expression = annulus(32394.566772, 18717.067856, 1087.500000, 2175.000000, X, Y) && !ellipse(33085.064000, 16433.694000, 1843.368053, 1843.368053, 0.000000, X, Y) && !ellipse(33394.958600, 19729.208000, 487.635214, 487.635214, 0.000000, X, Y) && !ellipse(33385.134000, 16977.424000, 3640.608105, 3640.608105, 0.000000, X, Y) && !ellipse(32912.286865, 15894.496918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31933.008000, 17496.818000, 1447.152042, 1447.152042, 0.000000, X, Y) && !ellipse(32110.292786, 17177.450882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33888.702000, 17102.120000, 1809.016052, 1809.016052, 0.000000, X, Y) && !ellipse(31642.724000, 15279.544000, 1820.304052, 1820.304052, 0.000000, X, Y) && !ellipse(33177.110107, 18211.653824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31739.584000, 18032.162000, 1490.856043, 1490.856043, 0.000000, X, Y) && !ellipse(33766.531921, 17869.628967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33804.432465, 16059.602570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30977.726318, 17362.136047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32486.380341, 18306.334824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31562.092957, 17088.058701, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 18:12:05 2012] Writing fullrun_mos2_xmm0103860601_pi300-10000_pass1_cl_src26.gif
[Fri Aug 31 18:19:16 2012] Mean detx,y = (-2777.52, -10495.39) 
[Fri Aug 31 18:19:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 18:19:23 2012] grppha failed
[Fri Aug 31 18:19:23 2012] Setting source spectrum file to fullrun_mos2_xmm0103860601_pi300-10000_pass1_cl_src26_src.pi.gz
[Fri Aug 31 18:19:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103860601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Aug 31 18:20:44 2012] Not generating rmf since there are only 37 counts
[Fri Aug 31 18:20:44 2012] rmf not generated due to insufficient counts
[Fri Aug 31 18:20:58 2012] Updating aperture counts using extracted products
[Fri Aug 31 18:20:58 2012] Error reading totcts from fullrun_mos2_xmm0103860601_pi300-10000_pass1_cl_src26_src.pi.gz
[Fri Aug 31 18:20:59 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 18:21:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 18:21:02 2012] xmm0103860601/analysis//spectral/fullrun_mos2_xmm0103860601_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete