[Fri Aug 31 10:06:40 2012] Detection parameters:
  Position = (399.5, 220.7) = 15 16 12.52 0 7 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.2 +/- 9.3
  Background counts = 11.8
  Rate = 0.006 +/- 0.001

[Fri Aug 31 10:06:40 2012] Off-axis axis estimate = 9.24'
[Fri Aug 31 11:57:25 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 11:57:25 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Fri Aug 31 11:57:25 2012] source mask rpix=2.5, npix_max = 36, mask sum = 42, frac = 1.136
[Fri Aug 31 11:57:25 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 11.05"
[Fri Aug 31 13:06:44 2012] fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_src14.ximg exists
[Fri Aug 31 13:06:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_src14.csv
[Fri Aug 31 13:06:44 2012] fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Aug 31 13:06:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_src14.csv
[Fri Aug 31 13:06:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 13:06:45 2012] fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Aug 31 13:06:45 2012] fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Aug 31 13:06:45 2012] Fit fullrun_mos1_xmm0103860601_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Aug 31 14:28:49 2012] Spatial fit model total counts = 169.724000, observed total counts = 169.000000
[Fri Aug 31 14:28:49 2012] Offset between fit and detection position for source 26 = 0.207039 pixels
[Fri Aug 31 14:28:49 2012] 167.370200 total counts/ 135.831000 bgd. counts: snr = 2.706146
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.207039 pixels
  Position = (399.6, 220.5) = 15 16 12.50 0 7 34.9
  Extent = 6.6 (4.7-10.1)", rotation angle = 0
  Source counts = 31.5 +/- 12.9
  Background counts = 135.8
  Rate = 0.002 +/- 0.001
[Fri Aug 31 14:28:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 14:28:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 14:28:49 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 14:28:49 2012] Source does appear to be extended
[Fri Aug 31 14:28:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 15:50:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 15:50:47 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Fri Aug 31 15:50:47 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.986
[Fri Aug 31 15:50:47 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 6.59"
[Fri Aug 31 16:49:38 2012] fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_src13.ximg exists
[Fri Aug 31 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_src13.csv
[Fri Aug 31 16:49:38 2012] fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Aug 31 16:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_src13.csv
[Fri Aug 31 16:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 16:49:39 2012] fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Aug 31 16:49:39 2012] fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Aug 31 16:49:39 2012] Fit fullrun_mos1_xmm0103860601_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Aug 31 17:57:17 2012] Warning, spatial fit 13 centroid is now closest to src. 17
[Fri Aug 31 17:57:17 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 17:57:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 17:57:17 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 17:57:17 2012] Source does appear to be extended
[Fri Aug 31 17:57:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 18:07:30 2012] XMMSAS src. selection expression = ellipse(34717.019400, 19139.010800, 395.190011, 395.190011, 0.000000, X, Y)
[Fri Aug 31 18:07:30 2012] Writing source region out to fullrun_mos1_xmm0103860601_pi300-10000_pass1_cl_src26_src.reg
[Fri Aug 31 18:07:30 2012] Extracting stamp from image fullrun_mos1_xmm0103860601_pi300-10000_cl_sm2.00.img.gz, (377, 198) - (422, 243)
[Fri Aug 31 18:07:30 2012] XMMSAS bgd. selection expression = annulus(34717.019400, 19139.010800, 658.650019, 1317.300038, X, Y) && !ellipse(33405.680200, 19730.962000, 395.676811, 395.676811, 0.000000, X, Y) && !ellipse(33296.716000, 16614.516000, 1881.936054, 1881.936054, 0.000000, X, Y) && !ellipse(33335.912720, 17948.342621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34796.994000, 17230.966000, 1844.216053, 1844.216053, 0.000000, X, Y)
[Fri Aug 31 18:07:30 2012] Writing fullrun_mos1_xmm0103860601_pi300-10000_pass1_cl_src26.gif
[Fri Aug 31 18:10:06 2012] Mean detx,y = (-10557.57, 4950.48) 
[Fri Aug 31 18:10:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 18:10:14 2012] grppha failed
[Fri Aug 31 18:10:14 2012] Setting source spectrum file to fullrun_mos1_xmm0103860601_pi300-10000_pass1_cl_src26_src.pi.gz
[Fri Aug 31 18:10:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103860601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Aug 31 18:12:04 2012] Not generating rmf since there are only 31 counts
[Fri Aug 31 18:12:04 2012] rmf not generated due to insufficient counts
[Fri Aug 31 18:20:58 2012] Updating aperture counts using extracted products
[Fri Aug 31 18:20:58 2012] Error reading totcts from fullrun_mos1_xmm0103860601_pi300-10000_pass1_cl_src26_src.pi.gz
[Fri Aug 31 18:20:58 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 18:21:00 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 18:21:01 2012] xmm0103860601/analysis//spectral/fullrun_mos1_xmm0103860601_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete