[Sat Jul 21 20:11:48 2012] Detection parameters:
  Position = (357.3, 474.7) = 21 56 44.13 -11 27 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.4 +/- 8.2
  Background counts = 2.0
  Rate = 0.006 +/- 0.001

[Sat Jul 21 20:11:48 2012] Off-axis axis estimate = 13.47'
[Sat Jul 21 20:48:32 2012] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 20:48:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 20:48:32 2012] Initial guess for spatial extent in simple fitting = 13.16"
[Sat Jul 21 20:48:32 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985
[Sat Jul 21 20:48:32 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.16"
[Sat Jul 21 21:05:02 2012] fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jul 21 21:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_src5.csv
[Sat Jul 21 21:05:02 2012] fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jul 21 21:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_src5.csv
[Sat Jul 21 21:05:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 21:05:02 2012] fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jul 21 21:05:02 2012] fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jul 21 21:05:02 2012] Fit fullrun_mos2_xmm0103860501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jul 21 21:05:09 2012] Spatial fit model total counts = 60.740500, observed total counts = 61.000000
[Sat Jul 21 21:05:09 2012] Offset between fit and detection position for source 11 = 0.427494 pixels
[Sat Jul 21 21:05:09 2012] 59.761700 total counts/ 21.273800 bgd. counts: snr = 8.344526
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.427494 pixels
  Position = (357.5, 474.4) = 21 56 44.06 -11 27 47.4
  Extent = 8.5 (6.3-10.9)", rotation angle = 0
  Source counts = 38.5 +/- 7.7
  Background counts = 21.3
  Rate = 0.005 +/- 0.001
[Sat Jul 21 21:05:09 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 21:05:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 21:05:09 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 21:05:09 2012] Source does appear to be extended
[Sat Jul 21 21:05:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 21:38:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 21:38:12 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Sat Jul 21 21:38:12 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.031
[Sat Jul 21 21:38:12 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.54"
[Sat Jul 21 21:53:07 2012] fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jul 21 21:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_src5.csv
[Sat Jul 21 21:53:07 2012] fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jul 21 21:53:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_src5.csv
[Sat Jul 21 21:53:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 21:53:08 2012] fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jul 21 21:53:08 2012] fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jul 21 21:53:08 2012] Fit fullrun_mos2_xmm0103860501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jul 21 21:53:16 2012] Spatial fit model total counts = 57.148400, observed total counts = 57.000000
[Sat Jul 21 21:53:16 2012] Offset between fit and detection position for source 11 = 0.070541 pixels
[Sat Jul 21 21:53:16 2012] 56.542700 total counts/ 17.890300 bgd. counts: snr = 9.138347
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.070541 pixels
  Position = (357.6, 474.3) = 21 56 44.04 -11 27 47.7
  Extent = 8.4 (6.1-10.9)", rotation angle = 0
  Source counts = 38.7 +/- 7.5
  Background counts = 17.9
  Rate = 0.005 +/- 0.001
[Sat Jul 21 21:53:16 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 21:53:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 21:53:16 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 21:53:16 2012] Source does appear to be extended
[Sat Jul 21 21:53:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 22:09:53 2012] XMMSAS src. selection expression = ellipse(31059.802600, 41216.936400, 506.878215, 506.878215, 0.000000, X, Y)
[Sat Jul 21 22:09:53 2012] Writing source region out to fullrun_mos2_xmm0103860501_pi300-10000_pass1_cl_src11_src.reg
[Sat Jul 21 22:09:53 2012] Extracting stamp from image fullrun_mos2_xmm0103860501_pi300-10000_cl_sm2.00.img.gz, (328, 445) - (387, 503)
[Sat Jul 21 22:09:53 2012] XMMSAS bgd. selection expression = annulus(31059.802600, 41216.936400, 844.797024, 1689.594049, X, Y)
[Sat Jul 21 22:09:53 2012] Writing fullrun_mos2_xmm0103860501_pi300-10000_pass1_cl_src11.gif
[Sat Jul 21 22:10:51 2012] Mean detx,y = (1235.55, 14512.41) 
[Sat Jul 21 22:10:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 22:11:06 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 22:11:06 2012] Setting source spectrum file to fullrun_mos2_xmm0103860501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jul 21 22:11:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103860501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jul 21 22:16:02 2012] Not generating rmf since there are only 38 counts
[Sat Jul 21 22:16:02 2012] rmf not generated due to insufficient counts
[Sat Jul 21 22:16:44 2012] Updating aperture counts using extracted products
[Sat Jul 21 22:16:44 2012] Error reading totcts from fullrun_mos2_xmm0103860501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jul 21 22:16:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 22:16:44 2012] Using photon index=1.80, rate=0.00512, arf fullrun_mos2_xmm0103860501_pi300-10000_pass1_cl_src11.arf
[Sat Jul 21 22:16:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 22:16:44 2012] Updating source flux to 1.7e-13
[Sat Jul 21 22:16:46 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting