[Tue May 21 11:17:04 2013] Detection parameters:
  Position = (303.4, 172.3) = 22 36 48.42 -22 21 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.3 +/- 9.9
  Background counts = 8.0
  Rate = 0.007 +/- 0.001

[Tue May 21 11:17:04 2013] Off-axis axis estimate = 9.15'
[Tue May 21 11:17:18 2013] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Tue May 21 11:17:18 2013] Initial guess for spatial extent in simple fitting = 11.00"
[Tue May 21 11:17:18 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.980
[Tue May 21 11:17:18 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 11.00"
[Tue May 21 11:17:19 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src27.ximg exists
[Tue May 21 11:17:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src27.csv
[Tue May 21 11:17:19 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue May 21 11:17:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src27.csv
[Tue May 21 11:17:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:20 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue May 21 11:17:20 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue May 21 11:17:20 2013] Fit fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue May 21 11:17:27 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.894871 pixels away
[Tue May 21 11:17:27 2013] Spatial fit model total counts = 135.467000, observed total counts = 134.000000
[Tue May 21 11:17:27 2013] Offset between fit and detection position for source 27 = 0.166021 pixels
[Tue May 21 11:17:27 2013] 131.412700 total counts/ 96.563900 bgd. counts: snr = 3.546340
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.166021 pixels
  Position = (303.3, 172.3) = 22 36 48.48 -22 21 22.9
  Extent = 5.4 (3.8-7.3)", rotation angle = 0
  Source counts = 34.8 +/- 11.5
  Background counts = 96.6
  Rate = 0.005 +/- 0.002
[Tue May 21 11:17:27 2013] Vigneting correction estimate = 1.000000
[Tue May 21 11:17:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 11:17:27 2013] Assessing source extent using major axis lower bound
[Tue May 21 11:17:27 2013] Source does appear to be extended
[Tue May 21 11:17:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:17:27 2013] Source is confused with source 26
[Tue May 21 11:17:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 11:17:36 2013] Initial guess for spatial extent in simple fitting = 5.39"
[Tue May 21 11:17:36 2013] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.745
[Tue May 21 11:17:36 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 5.39"
[Tue May 21 11:17:37 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src26.ximg exists
[Tue May 21 11:17:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src26.csv
[Tue May 21 11:17:37 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue May 21 11:17:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src26.csv
[Tue May 21 11:17:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:38 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue May 21 11:17:38 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue May 21 11:17:38 2013] Fit fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue May 21 11:17:46 2013] Warning, spatial fit 26 centroid is now closest to src. 29
[Tue May 21 11:17:46 2013] Vigneting correction estimate = 1.000000
[Tue May 21 11:17:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 11:17:46 2013] Assessing source extent using major axis lower bound
[Tue May 21 11:17:46 2013] Source does appear to be extended
[Tue May 21 11:17:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:17:55 2013] XMMSAS src. selection expression = ellipse(26335.662800, 14939.265600, 323.226009, 323.226009, 0.000000, X, Y)
[Tue May 21 11:17:55 2013] Not overwriting source region fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_src.reg
[Tue May 21 11:17:55 2013] Extracting stamp from image fullrun_pn_xmm0103860201_pi300-10000_cl_sm2.00.img.gz, (285, 154) - (322, 191)
[Tue May 21 11:17:55 2013] XMMSAS bgd. selection expression = annulus(26335.662800, 14939.265600, 538.710016, 1077.420031, X, Y) && !ellipse(26838.745100, 14806.551200, 462.013613, 462.013613, 0.000000, X, Y)
[Tue May 21 11:17:55 2013] Writing fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27.gif
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/events/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0103860201/products/events/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Tue May 21 11:17:56 2013] Mean detx,y = (-5231.45, -8692.24) 
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/images/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_src.img and ../../xmm0103860201/products/images/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/spectra/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0103860201/products/spectra/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Tue May 21 11:17:56 2013] Setting source spectrum file to fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue May 21 11:17:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/lightcurves/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0103860201/products/lightcurves/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Tue May 21 11:17:59 2013] Not generating rmf since there are only 34 counts
[Tue May 21 11:17:59 2013] rmf not generated due to insufficient counts
[Tue May 21 11:17:59 2013] fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Tue May 21 11:24:30 2013] Updating aperture counts using extracted products
[Tue May 21 11:24:30 2013] Total counts from fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 49.00
[Tue May 21 11:24:30 2013] Total counts from fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 68.00
[Tue May 21 11:24:30 2013] Got source and background scale factors 328000.000000, 2173924.000000
[Tue May 21 11:24:30 2013] User source parameters:
  Position = (303.3, 172.3) = 22 36 48.48 -22 21 22.9
  Extent = 5.4 (3.8-7.3)", rotation angle = 0
  Source aperture counts = 38.7 +/- 8.1
  Background aperture counts = 10.3
  Rate = 0.006 +/- 0.001

[Tue May 21 11:24:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 11:24:31 2013] Using photon index=1.80, rate=0.0054, arf fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27.arf
[Tue May 21 11:24:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 11:24:31 2013] Updating source flux to 3.5e-14
[Tue May 21 11:24:36 2013] Flag c found in src. 27 procflags, skipping spectral fitting
[Tue May 21 11:24:36 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 11:24:39 2013] xmm0103860201/analysis//spectral/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete