[Tue May 21 11:17:04 2013] Detection parameters:
  Position = (309.4, 171.0) = 22 36 46.56 -22 21 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.6 +/- 7.8
  Background counts = 8.1
  Rate = 0.004 +/- 0.0009

[Tue May 21 11:17:04 2013] Off-axis axis estimate = 9.27'
[Tue May 21 11:17:18 2013] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Tue May 21 11:17:18 2013] Initial guess for spatial extent in simple fitting = 11.06"
[Tue May 21 11:17:18 2013] source mask rpix=2.5, npix_max = 37, mask sum = 32, frac = 0.864
[Tue May 21 11:17:18 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 11.06"
[Tue May 21 11:17:19 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src26.ximg exists
[Tue May 21 11:17:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src26.csv
[Tue May 21 11:17:19 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue May 21 11:17:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src26.csv
[Tue May 21 11:17:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:20 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue May 21 11:17:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue May 21 11:17:20 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue May 21 11:17:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue May 21 11:17:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:27 2013] Warning, spatial fit 26 centroid is now closest to src. 27
[Tue May 21 11:17:27 2013] Vigneting correction estimate = 1.000000
[Tue May 21 11:17:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 11:17:27 2013] Assessing source extent using major
[Tue May 21 11:17:27 2013] Source does appear to be extended
[Tue May 21 11:17:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:17:27 2013] Source is confused with source 27
[Tue May 21 11:17:36 2013] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Tue May 21 11:17:36 2013] Initial guess for spatial extent in simple fitting = 11.06"
[Tue May 21 11:17:36 2013] source mask rpix=2.5, npix_max = 37, mask sum = 32, frac = 0.864
[Tue May 21 11:17:36 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.06"
[Tue May 21 11:17:37 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src25.ximg exists
[Tue May 21 11:17:37 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src25.csv
[Tue May 21 11:17:37 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue May 21 11:17:37 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src25.csv
[Tue May 21 11:17:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:38 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue May 21 11:17:38 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue May 21 11:17:38 2013] Fit fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue May 21 11:17:46 2013] Spatial fit model total counts = 135.170000, observed total counts = 127.000000
[Tue May 21 11:17:46 2013] Offset between fit and detection position for source 26 = 0.436520 pixels
[Tue May 21 11:17:46 2013] 102.791500 total counts/ 77.891400 bgd. counts: snr = 2.821346
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.436520 pixels
  Position = (309.0, 170.7) = 22 36 46.66 -22 21 29.5
  Extent = 5.8 (3.4-10.0)", rotation angle = 0
  Source counts = 24.9 +/- 10.1
  Background counts = 77.9
  Rate = 0.004 +/- 0.002
[Tue May 21 11:17:46 2013] Vigneting correction estimate = 1.000000
[Tue May 21 11:17:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 11:17:46 2013] Assessing source extent using major axis lower bound
[Tue May 21 11:17:46 2013] Source does appear to be extended
[Tue May 21 11:17:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:17:55 2013] XMMSAS src. selection expression = ellipse(26838.745100, 14806.551200, 346.510210, 346.510210, 0.000000, X, Y)
[Tue May 21 11:17:55 2013] Not overwriting source region fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_src.reg
[Tue May 21 11:17:55 2013] Extracting stamp from image fullrun_pn_xmm0103860201_pi300-10000_cl_sm2.00.img.gz, (289, 151) - (329, 191)
[Tue May 21 11:17:55 2013] XMMSAS bgd. selection expression = annulus(26838.745100, 14806.551200, 577.517017, 1155.034033, X, Y) && !ellipse(26335.662800, 14939.265600, 430.968012, 430.968012, 0.000000, X, Y)
[Tue May 21 11:17:55 2013] Writing fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26.gif
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/events/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0103860201/products/events/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Tue May 21 11:17:56 2013] Mean detx,y = (-5700.56, -8650.70) 
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/images/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_src.img and ../../xmm0103860201/products/images/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/spectra/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0103860201/products/spectra/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Tue May 21 11:17:56 2013] Setting source spectrum file to fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 21 11:17:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/lightcurves/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0103860201/products/lightcurves/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Tue May 21 11:17:59 2013] Not generating rmf since there are only 24 counts
[Tue May 21 11:17:59 2013] rmf not generated due to insufficient counts
[Tue May 21 11:17:59 2013] fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Tue May 21 11:24:29 2013] Updating aperture counts using extracted products
[Tue May 21 11:24:29 2013] Total counts from fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 43.00
[Tue May 21 11:24:30 2013] Total counts from fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_bgd.pi.gz = 102.00
[Tue May 21 11:24:30 2013] Got source and background scale factors 336698.000000, 2507984.000000
[Tue May 21 11:24:30 2013] User source parameters:
  Position = (309.0, 170.7) = 22 36 46.66 -22 21 29.5
  Extent = 5.8 (3.4-10.0)", rotation angle = 0
  Source aperture counts = 29.3 +/- 7.6
  Background aperture counts = 13.7
  Rate = 0.005 +/- 0.001

[Tue May 21 11:24:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 11:24:31 2013] Using photon index=1.80, rate=0.00386, arf fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26.arf
[Tue May 21 11:24:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 11:24:31 2013] Updating source flux to 2.7e-14
[Tue May 21 11:24:36 2013] Flag c found in src. 26 procflags, skipping spectral fitting
[Tue May 21 11:24:36 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 11:24:39 2013] xmm0103860201/analysis//spectral/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete