[Tue May 21 11:17:04 2013] Detection parameters:
  Position = (354.2, 277.1) = 22 36 32.51 -22 13 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.4 +/- 9.9
  Background counts = 8.2
  Rate = 0.01 +/- 0.002

[Tue May 21 11:17:04 2013] Off-axis axis estimate = 4.33'
[Tue May 21 11:17:18 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 11:17:18 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Tue May 21 11:17:18 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Tue May 21 11:17:18 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 8.59"
[Tue May 21 11:17:19 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src25.ximg exists
[Tue May 21 11:17:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src25.csv
[Tue May 21 11:17:19 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue May 21 11:17:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src25.csv
[Tue May 21 11:17:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:20 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue May 21 11:17:20 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue May 21 11:17:20 2013] Fit fullrun_pn_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue May 21 11:17:27 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.375076 pixels away
[Tue May 21 11:17:27 2013] Vigneting correction estimate = 1.000000
[Tue May 21 11:17:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 11:17:27 2013] Assessing source extent using major
[Tue May 21 11:17:27 2013] Source does appear to be extended
[Tue May 21 11:17:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:17:36 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 11:17:36 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Tue May 21 11:17:36 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Tue May 21 11:17:36 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 8.59"
[Tue May 21 11:17:37 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src24.ximg exists
[Tue May 21 11:17:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src24.csv
[Tue May 21 11:17:37 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue May 21 11:17:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src24.csv
[Tue May 21 11:17:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:38 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue May 21 11:17:38 2013] fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue May 21 11:17:38 2013] Fit fullrun_pn_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue May 21 11:17:46 2013] Spatial fit model total counts = 103.000000, observed total counts = 103.000000
[Tue May 21 11:17:46 2013] Offset between fit and detection position for source 25 = 0.084788 pixels
[Tue May 21 11:17:46 2013] 103.283700 total counts/ 74.107600 bgd. counts: snr = 3.389190
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.084788 pixels
  Position = (354.1, 277.1) = 22 36 32.54 -22 13 46.9
  Extent = 3.7 (2.4-7.4)", rotation angle = 0
  Source counts = 29.2 +/- 10.2
  Background counts = 74.1
  Rate = 0.005 +/- 0.002
[Tue May 21 11:17:46 2013] Vigneting correction estimate = 1.000000
[Tue May 21 11:17:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 11:17:46 2013] Assessing source extent using major axis lower bound
[Tue May 21 11:17:46 2013] Source does appear to be extended
[Tue May 21 11:17:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:17:55 2013] XMMSAS src. selection expression = ellipse(30761.745400, 24059.136400, 219.743406, 219.743406, 0.000000, X, Y)
[Tue May 21 11:17:55 2013] Not overwriting source region fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_src.reg
[Tue May 21 11:17:55 2013] Extracting stamp from image fullrun_pn_xmm0103860201_pi300-10000_cl_sm2.00.img.gz, (342, 264) - (367, 290)
[Tue May 21 11:17:55 2013] XMMSAS bgd. selection expression = annulus(30761.745400, 24059.136400, 366.239011, 732.478021, X, Y)
[Tue May 21 11:17:55 2013] Writing fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25.gif
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/events/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0103860201/products/events/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Tue May 21 11:17:56 2013] Mean detx,y = (-6247.06, 1395.66) 
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/images/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_src.img and ../../xmm0103860201/products/images/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/spectra/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0103860201/products/spectra/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Tue May 21 11:17:56 2013] Setting source spectrum file to fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue May 21 11:17:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue May 21 11:17:56 2013] ../../xmm0103860201/products/lightcurves/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0103860201/products/lightcurves/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Tue May 21 11:17:59 2013] Not generating rmf since there are only 29 counts
[Tue May 21 11:17:59 2013] rmf not generated due to insufficient counts
[Tue May 21 11:17:59 2013] fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Tue May 21 11:24:29 2013] Updating aperture counts using extracted products
[Tue May 21 11:24:29 2013] Total counts from fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 35.00
[Tue May 21 11:24:29 2013] Total counts from fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_bgd.pi.gz = 37.00
[Tue May 21 11:24:29 2013] Got source and background scale factors 147200.000000, 1273600.000000
[Tue May 21 11:24:29 2013] User source parameters:
  Position = (354.1, 277.1) = 22 36 32.54 -22 13 46.9
  Extent = 3.7 (2.4-7.4)", rotation angle = 0
  Source aperture counts = 30.7 +/- 7.0
  Background aperture counts = 4.3
  Rate = 0.005 +/- 0.001

[Tue May 21 11:24:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 11:24:31 2013] Using photon index=1.80, rate=0.00453, arf fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25.arf
[Tue May 21 11:24:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 11:24:31 2013] Updating source flux to 2.5e-14
[Tue May 21 11:24:36 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 11:24:39 2013] xmm0103860201/analysis//spectral/fullrun_pn_xmm0103860201_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete