[Tue May 21 11:17:05 2013] Detection parameters:
  Position = (279.5, 284.7) = 22 36 55.92 -22 13 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11147.2 +/- 125.7
  Background counts = 11.5
  Rate = 1 +/- 0.01

[Tue May 21 11:17:05 2013] Off-axis axis estimate = 1.69'
[Tue May 21 11:17:20 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue May 21 11:17:20 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Tue May 21 11:17:20 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Tue May 21 11:17:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue May 21 11:17:20 2013] fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 21 11:17:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_src1.csv
[Tue May 21 11:17:20 2013] fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 21 11:17:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_src1.csv
[Tue May 21 11:17:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:20 2013] fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 21 11:17:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 21 11:17:20 2013] fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 21 11:17:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 21 11:17:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:30 2013] Spatial fit model total counts = 10468.400000, observed total counts = 9098.000000
[Tue May 21 11:17:30 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 11:17:30 2013] Vigneting correction estimate = 1.000000
[Tue May 21 11:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 11:17:30 2013] Assessing source extent using major
[Tue May 21 11:17:30 2013] Source does appear to be extended
[Tue May 21 11:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:17:38 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue May 21 11:17:38 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Tue May 21 11:17:38 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Tue May 21 11:17:38 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Tue May 21 11:17:39 2013] fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 21 11:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_src1.csv
[Tue May 21 11:17:39 2013] fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 21 11:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_src1.csv
[Tue May 21 11:17:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:39 2013] fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 21 11:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 21 11:17:39 2013] fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 21 11:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 21 11:17:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 11:17:48 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.747182 pixels away
[Tue May 21 11:17:48 2013] Vigneting correction estimate = 1.000000
[Tue May 21 11:17:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 11:17:48 2013] Assessing source extent using major
[Tue May 21 11:17:48 2013] Source does appear to be extended
[Tue May 21 11:17:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 11:24:11 2013] Counts = 11147.154297, rescaling region sizes by 3.000000
[Tue May 21 11:24:11 2013] XMMSAS src. selection expression = ellipse(24269.274414, 24721.808228, 1957.500000, 1957.500000, 0.000000, X, Y)
[Tue May 21 11:24:11 2013] Not overwriting source region fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_src.reg
[Tue May 21 11:24:11 2013] Extracting stamp from image fullrun_mos2_xmm0103860201_pi300-10000_cl_sm2.00.img.gz, (167, 172) - (392, 397)
[Tue May 21 11:24:11 2013] XMMSAS bgd. selection expression = annulus(24269.274414, 24721.808228, 9787.500000, 19575.000000, X, Y) && !ellipse(33213.879608, 28228.069122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.330780, 14872.173904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10410.969980, 31246.698000, 490.151214, 490.151214, 0.000000, X, Y) && !ellipse(13803.601060, 27161.181600, 460.705613, 460.705613, 0.000000, X, Y) && !ellipse(14238.339400, 34229.479800, 248.047207, 248.047207, 0.000000, X, Y)
[Tue May 21 11:24:11 2013] Writing fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1.gif
[Tue May 21 11:24:11 2013] ../../xmm0103860201/products/events/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0103860201/products/events/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue May 21 11:24:11 2013] Mean detx,y = (82.63, 75.93) 
[Tue May 21 11:24:11 2013] ../../xmm0103860201/products/images/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0103860201/products/images/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue May 21 11:24:11 2013] ../../xmm0103860201/products/spectra/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0103860201/products/spectra/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue May 21 11:24:11 2013] Setting source spectrum file to fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 21 11:24:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 21 11:24:11 2013] ../../xmm0103860201/products/lightcurves/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0103860201/products/lightcurves/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue May 21 11:24:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 11:24:12 2013] rmf not generated due to insufficient counts
[Tue May 21 11:24:12 2013] fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue May 21 11:24:31 2013] Updating aperture counts using extracted products
[Tue May 21 11:24:31 2013] Total counts from fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 9729.00
[Tue May 21 11:24:31 2013] Total counts from fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 14828.00
[Tue May 21 11:24:31 2013] Got source and background scale factors 4138092.000000, 564287618.000000
[Tue May 21 11:24:31 2013] User source parameters:
  Position = (279.5, 284.7) = 22 36 55.92 -22 13 14.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 9620.3 +/- 99.6
  Background aperture counts = 108.7
  Rate = 0.9 +/- 0.01

[Tue May 21 11:24:31 2013] Updating counts from extracted products
[Tue May 21 11:24:31 2013] Set source signif. to 9620.26/10.43 = 922.56
[Tue May 21 11:24:32 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 11:24:32 2013] Using photon index=1.80, rate=0.919, arf fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1.arf
[Tue May 21 11:24:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 11:24:32 2013] Updating source flux to 9.8e-12
[Tue May 21 11:24:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 11:24:36 2013] xmm0103860201/analysis//spectral/fullrun_mos2_xmm0103860201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete